Address = Address Address.address =Address Address.complement =Complement Address.completeAddress1 =House Number Address.completeAddress2 =Street Number Address.completeAddress3 =Group Number Address.completeAddress4 =Village Name Address.district =District Address.zipCode =Zip code AdministrativeUnit =Administrative unit AdministrativeUnit.parent =Parent admin. unit AgeRange =Age range AgeRange.endAge =Final age AgeRange.iniAge =Initial age Batch =Batch Batch.adjustBatchSuccess =Set completed! Batch.batchNumber =Batch number Batch.brandName =Brand name Batch.cantAdjustBatch =No adjustment was made. Batch.expiryDate =Expiration date Batch.manufacturer =Manufacturer Batch.numContainers =Number of boxes Batch.quantityContainer =Quantity per box Batch.quantityReceived =Received qty Batch.remainingQuantity =Available qty Batch.reservedQuantity =Reserved quantity CaseClassification =Classification CaseClassification.DRTB =DR-TB Case CaseClassification.DRTB.suspect=DR-TB suspect CaseClassification.NTM =NTM Case CaseClassification.NTM.suspect=NTM suspect CaseClassification.TB =TB Case CaseClassification.TB.suspect =TB suspect CaseState =Case status CaseState.CURED =Cured CaseState.DEFAULTED =Lost to follow up CaseState.DIAGNOSTIC_CHANGED =Other Diseases CaseState.DIED =Died CaseState.DIED_NOTTB =Died from other causes CaseState.FAILED =Failed CaseState.MDR_CASE =Category IV (DR-TB) CaseState.NOT_CONFIRMED =Not confirmed CaseState.NOT_ON_TREATMENT =DR-TB Suspects CaseState.NOT_TB =Not DR-TB CaseState.NTM =Non-Tuberculous Mycobacteria CaseState.ONTREATMENT =On treatment CaseState.OTHER =Other CaseState.REGIMEN_CHANGED =Regimen changed CaseState.SUSCEPTIBLE_TB =Susceptible TB CaseState.TB_NOT_DETECTED =TB not grew or detected CaseState.TB_RESISTANCE_ES =TB with resistance to E/S/ES CaseState.TRANSFERRED_OUT =Transferred out CaseState.TRANSFERRED_OUT.desc=Where to CaseState.TRANSFERRING =Transferring to another unit CaseState.TREATMENT_COMPLETED =Treatment completed CaseState.TREATMENT_INTERRUPTION=Treatment interrupted CaseState.TREATMENT_REFUSED =Refused to be treated CaseState.WAITING_TREATMENT =Waiting to start treatment CaseValidationOption.DISABLED =Disabled CaseValidationOption.ENABLED =Enabled CaseValidationOption.REQUIRED_BEFORE_TREATMENT_START=Enabled and required before treatment starts CultureResult =Culture result CultureResult.CONTAMINATED =Contaminated CultureResult.NEGATIVE =Negative CultureResult.NOTDONE =Not done CultureResult.OTHER =Other CultureResult.PENDING =Pending CultureResult.PLUS =+ CultureResult.PLUS2 =++ CultureResult.PLUS3 =+++ CultureResult.PLUS4 =++++ CultureResult.POSITIVE =Positive DSTExam.msg01 =In tests of TB-case should not be the resistants results DSTExam.msg02 =In tests of MDR-TB-case must be at least one resistant result DSTExam.msg03 =At least one result must be given DSTExam.msg05 =You are entering a DST with resistant results for a TB case or suspect patient. Do you want to continue? DSTExam.msg4 =This is a DR-TB case with no resistant result. Do you want to continue? DeathOutcome.OTHER_CAUSES =Other causes DeathOutcome.TB =TB DestinationFormat =Destination format DestinationFormat.CSV =CSV text file DestinationFormat.EXCEL =Microsoft Excel file DestinationFormat.TEXT =Text file DestinationFormat.XML =XML file DiagnosisSource =Diagnosis confirmed by DiagnosisSource.CLINICAL =Clinical DiagnosisSource.LAB_TEST =Laboratory tests DiagnosisSource.OTHER =Other DiagnosisSource.XRAY =X-Ray DiagnosisType =Type of diagnosis DiagnosisType.CONFIRMED =Confirmed DiagnosisType.SUSPECT =Suspect Dispensing.last.date =Last dispensing date DisplayCaseNumber =Display case number DisplayCaseNumber.CASE_ID =Case number (System generated) DisplayCaseNumber.USER_DEFINED=Registration code (User defined) DisplayCaseNumber.VALIDATION_NUMBER=Validation number (System generated) Dot.N =N Dot.O =O Dot.X =X DotBy.AMBULATORY =Ambulatory DotBy.CHW =Community Health Care Worker DotBy.COMMUNITY =Community DotBy.H =Household member, friend, relative DotBy.HCW =Health Care Worker DotBy.HOMECARE =Homecare DotBy.HOSPITAL =Hospital DotBy.ND =Not done DotBy.NONDOT =Non-DOT DrugResistanceType =Type of TB drug resistance DrugResistanceType.EXTENSIVEDRUG_RESISTANCE=Extensive drug-resistance (XDR-TB) DrugResistanceType.MONO_RESISTANCE=Mono-resistance (Mono DR-TB) DrugResistanceType.MULTIDRUG_RESISTANCE=Multidrug-resistance (MDR-TB) DrugResistanceType.POLY_RESISTANCE=Poly-resistance (PDR-TB) DrugResistanceType.RIF_RESISTANCE=RIF Resistance detected (RR-TB) DstResult =Susceptibility test result DstResult.BASELINE =Baseline DstResult.CONTAMINATED =Contaminated DstResult.ERROR =Error DstResult.INTERMEDIATE =Intermediate DstResult.NOTDONE =Not done DstResult.NOTRESISTANT =Not Resistant DstResult.ONGOING =Pending DstResult.RESISTANT =Resistant DstResult.SUSCEPTIBLE =Susceptible EntityState =State EntityState.ACTIVE =Active EntityState.INACTIVE =Inactive ExamCulture.identification =Identification ExamCulture.numberOfColonies =Report number of colonies ExamStatus =Exam status ExamStatus.ONGOING =On going ExamStatus.PERFORMED =Performed ExamStatus.REQUESTED =Requested ExportContent =Content to export ExportContent.CASEDATA =Case data ExportContent.EXAMS =Laboratory exam results ExportContent.MEDEXAM =Medical examination data ExportContent.REGIMENS =Treatment regimens ExtraOutcomeInfo = FieldValue.other =Display field to enter additional information FieldValue.otherDescription =Field label for additional information FilterHealthUnit.BOTH =Both FilterHealthUnit.NOTIFICATION_UNIT=Notification health unit FilterHealthUnit.TREATMENT_UNIT=Treatment health unit FixedPeriod.LAST_12MONTHS =Last 12 months FixedPeriod.LAST_3MONTHS =Last 3 months FixedPeriod.LAST_6MONTHS =Last 6 months FixedPeriod.PREVIOUS_QUARTER =Previous quarter FixedPeriod.PREVIOUS_YEAR =Previous year Forecasting.publicView =Make this forecasting available for other users Gender =Gender Gender.FEMALE =Female Gender.MALE =Male HIVResult =HIV testing result HIVResult.NEGATIVE =Negative HIVResult.NOTDONE =Not done HIVResult.ONGOING =Result pending HIVResult.POSITIVE =Positive HealthSystem =Health System IndicatorDate.DIAGNOSIS_DATE =Diagnosis Date IndicatorDate.INITREATMENT_DATE=Start Treatment Date IndicatorDate.REGISTRATION_DATE=Registration Date IndicatorSite.PATIENTADDRESS =Patient address IndicatorSite.TREATMENTSITE =Notification health unit site InfectionSite =Site of Disease InfectionSite.BOTH =Both InfectionSite.EXTRAPULMONARY =Extrapulmonary TB InfectionSite.PULMONARY =Pulmonary TB Issue =Issue Issue.answered =Answered Issue.new =New issue Issue.textrequired =Please enter a text to this issue Issue.title =Title Laboratory =Laboratory LocalityType =Locality type LocalityType.RURAL =Rural LocalityType.URBAN =Urban LogValue.fieldValue =Field value LogValue.key =Field LogValue.newValue =New value LogValue.prevValue =Previous value MedAppointmentType =Medical appointment MedAppointmentType.EXTRA =Extra MedAppointmentType.SCHEDULLED =Scheduled MedicalExamination =Medical consultation MedicalExamination.BMI =BMI MedicalExamination.Other =With? MedicalExamination.RefByDate =Date of Referral MedicalExamination.RefByUnit =Referring Health Unit Name & Address MedicalExamination.RefByUnit.PhNum=Referring Health Unit Phone Number MedicalExamination.RefToDate =Date of Referral MedicalExamination.RefToUnit =Unit Name MedicalExamination.ReferredBy =Patient Referred By MedicalExamination.ReferredTo =Patient Referred To MedicalExamination.addressChanged=Patient address changed? MedicalExamination.bloodPression=Blood pressure MedicalExamination.date =Examination date MedicalExamination.dotduringcontphase=DOT during continuous phase by MedicalExamination.dotduringintphase=DOT during intensive phase by MedicalExamination.heartRate =Heart Rate MedicalExamination.height =Height MedicalExamination.height.unit=cm MedicalExamination.nutrition =Nutritional Support MedicalExamination.reasonNotTakingMed=Reason MedicalExamination.reasonNotUsingPrescMedicines=Reason MedicalExamination.respRateRest=Resp Rate (rest) MedicalExamination.responsible=Professional responsible for patient examination MedicalExamination.surgicalProcedure=Surgical procedure MedicalExamination.surgicalProcedureDesc=Which? MedicalExamination.temperature=Temperature MedicalExamination.usingPrescMedicines=Is patient taking the prescribed medicines correctly? MedicalExamination.weight =Weight MedicalExamination.weight.unit=Kg Medicine =Medicine Medicine.abbrevName = Medicine.components =Components of the medicine Medicine.dosageForm =Dosage Form Medicine.firstLine =1st Line Medicine.firstSecondLine =1st and 2nd Line Medicine.frequencies =Weekly available frequencies Medicine.genericName =Generic Name Medicine.posologies =Posologies Medicine.secondLine =2nd Line Medicine.strength =Strength Medicine.strengthUnit =Unit MedicineCategory =Route MedicineCategory.INJECTABLE =Injectable MedicineCategory.ORAL =Oral MedicineDispensing.days =Dispensing days MedicineDispensing.msg01 =It already exists a dispensing for that case on that date. MedicineDispensing.quantity =Dispensed quantity MedicineLine =Type MedicineLine.FIRST_LINE =First line MedicineLine.OTHER =Other MedicineLine.SECOND_LINE =Second line MedicineReceiving =Medicine Receiving MedicineReceiving.items =Items MedicineReceiving.medicines =Received medicines MedicineReceiving.receivingDate=Receiving Date MedicineUnit.minBufferStock =Minimum buffer stock MicroscopyResult =Microscopy result MicroscopyResult.NEGATIVE =Negative MicroscopyResult.NOTDONE =Not done MicroscopyResult.PENDING =Pending MicroscopyResult.PLUS =+ MicroscopyResult.PLUS2 =++ MicroscopyResult.PLUS3 =+++ MicroscopyResult.POSITIVE =Scanty Movement.quantity =Quantity MovementException.NEGATIVE_STOCK=The quantity available of batch {0} in {1} is not enough for the requested value MovementType =Movement type MovementType.ADJUSTMENT =Adjustment MovementType.DISPENSING =Medicine dispensing to patient MovementType.DRUGRECEIVING =Medicine receiving from source MovementType.INITIALIZE =Medicine management initialization MovementType.ORDERRECEIVING =Medicine order receiving MovementType.ORDERSHIPPING =Order shipping MovementType.TRANSFERIN =Receiving from other unit MovementType.TRANSFEROUT =Medicine transfer to NameComposition =Patient name composition NameComposition.FIRSTSURNAME =First name and surname in 2 separate fields NameComposition.FIRST_MIDDLE_LASTNAME=First, middle and last name in 3 separate fields NameComposition.FULLNAME =Full name in one single field NameComposition.LAST_FIRST_MIDDLENAME=Last, first and middle name in 3 separate fields NameComposition.LAST_FIRST_MIDDLENAME_WITHOUT_COMMAS= NameComposition.SURNAME_FIRSTNAME=Surname and first name in 2 separate fields Nationality =Nationality Nationality.CAMBODIA =Cambodian Nationality.FOREIGN =Foreign Nationality.LAO =Laotian Nationality.NATIVE =Cambodian Nationality.OTHER =Others Nationality.THAILAND =Thai Nationality.VIETNAM =Vietnamese Order =Medicine Order Order.approvingDate =Approval date Order.cancelReason =Cancellation reason Order.cases =Cases on order Order.items =Items Order.new.pendingOrder =There is already a pending order for your unit. A new order can only be made \u200b\u200bwhen the pending order is completed. Order.orderDate =Order date Order.receivingDate =Receiving date Order.shipAddress =Shipping address Order.shipAddressCont =Address (cont.) Order.shipContactName =Contact name Order.shipContactName.hint =Name of the person responsible for receiving the medicines Order.shipContactPhone =Contact phone Order.shipInstitutionName =receipt institution Order.shipZipCode =ZIP Order.shippingDate =Shipping Date Order.status =Order status Order.unitFrom =From Order.unitTo =To OrderItem.approvedQuantity =Approved Quantity OrderItem.batches =Batches OrderItem.estimatedQuantity =Estimated Quantity OrderItem.numPatients =Cases OrderItem.quantityToShip =Quantity to ship OrderItem.receivedQuantity =Received Quantity OrderItem.requestedQuantity =Requested Quantity OrderItem.shippedQuantity =Shipped Quantity OrderStatus =Order status OrderStatus.CANCELLED =Cancelled OrderStatus.PREPARINGSHIPMENT =Preparing shipment OrderStatus.RECEIVED =Received OrderStatus.SHIPPED =Shipped OrderStatus.SHIPPEDPARTIALLY =Shipped partially OrderStatus.WAITAUTHORIZING =Waiting for authorization OrderStatus.WAITSHIPMENT =Waiting for shipment OutputSelection =Output selection Patient =Patient Patient.birthDate =Birth date Patient.caseNumber =Record number Patient.firstname =Given Name Patient.fullname =Full name Patient.lastName =Last name Patient.middleName =Middle name Patient.motherName =Mother's name Patient.name =Patient name Patient.nationalid =National ID Number Patient.recordNumber =Record Number Patient.securityNumber =National Identity Card Patient.surname =Family Name PatientSample.dateCollected =Date collected PatientSample.identification =Collected sample identification PatientSample.sampleNumber =Sample ID number PatientSample.sampleType =Type of specimen PatientType =Type of patient PatientType.AFTER_DEFAULT =After default PatientType.ANOTHER_TB = PatientType.FAILURE_CATI =Category I Failure PatientType.FAILURE_CATII =Category II Failure PatientType.FAILURE_CATIV =After Cat IV Failure PatientType.FAILURE_FT =Failure 1st treatment PatientType.FAILURE_RT =Failure re-treatment PatientType.MDRTB_CONTACT =MDR-TB Contact PatientType.NEW =New PatientType.OTHER =Other PatientType.OTHERNEG =Other (-) PatientType.OTHERPOS =Other (+) PatientType.OTHER_NONDOTS =Other Non-DOTS PatientType.PREV_MDRTB =Previously MDR-TB Treated PatientType.RAD =RAD PatientType.RELAPSE =Relapse PatientType.RELAPSE_CATI =Cat I Relapse PatientType.RELAPSE_CATII =Cat II Relapse PatientType.RELAPSE_CATIV =Cat IV Relapse PatientType.RESISTANCE_PATTERN_CHANGED=Resistance Pattern Changed PatientType.TB_HIV =TB/HIV PatientType.TRANSFER_IN =Transferred in PatientType.FAILURE =Failure Period.endDate =Finish date Period.iniDate =Start date PhysicalExamResult.ABNORMAL =Abnormal PhysicalExamResult.NORMAL =Normal PhysicalExamResult.NOT_DONE =Not done PrescribedMedicine =Prescribed medicine PrescribedMedicine.doseUnit =Dose unit PrescribedMedicine.frequency =Frequency PrescribedMedicine.iniMonth =Initial month PrescribedMedicine.months =Duration of Regimen PrevTBTreatment.outcome =Outcome PrevTBTreatmentOutcome.COMPLETED=Completed PrevTBTreatmentOutcome.CURED =Cured PrevTBTreatmentOutcome.DEFAULTED=Defaulted PrevTBTreatmentOutcome.DIAGNOSTIC_CHANGED=Other diseases PrevTBTreatmentOutcome.FAILURE=Failed PrevTBTreatmentOutcome.ONGOING=Ongoing PrevTBTreatmentOutcome.OTHER =Other PrevTBTreatmentOutcome.SCHEME_CHANGED=Regimen changed PrevTBTreatmentOutcome.SHIFT_CATIV=Shifted to Cat IV PrevTBTreatmentOutcome.TRANSFERRED_OUT=Transferred out PrevTBTreatmentOutcome.UNKNOWN=Unknown ProductGroup =Group ProductGroup.code =Group's code ReferredBy.AIDSPROGRAM =OI/ART (AIDS PROGRAM) ReferredBy.COMMUNITY =Community ReferredBy.HEALTHCENTER =Health Center ReferredBy.OTHER =Other ReferredBy.PRIVATE_SECTOR =Private Sector ReferredBy.REFERRALHOSPITAL =Referral Hospital ReferredBy.SELF_REFERRAL =Self Referral Regimen =Treatment Regimen Regimen.add =Add Medicine Regimen.caseClassification =Target classification Regimen.doseunit =Default dose unit Regimen.duration = Regimen.frequency =Default Frequency Regimen.length =Duration (months) Regimen.months =Duration (months) Regimen.monthsContinuousPhase =Continuation phase duration (months) Regimen.monthsIntensivePhase =Intensive phase duration (months) Regimen.phase =Regimen phase RegimenPhase =Regimen Phase RegimenPhase.CONTINUOUS =Continuation Phase RegimenPhase.INTENSIVE =Intensive Phase RoleAction.DELETE =Removed RoleAction.EDIT =Edited RoleAction.EXEC =Executed RoleAction.NEW =New SampleType.CSF =CSF SampleType.OTHER =Other sample (not sputum) SampleType.PUS =Pus SampleType.SPUTUM =Sputum SampleType.STOOL =Stool SampleType.TISSUE =Tissue SampleType.URINE =Urine ShippedReceivedDiffTypes.BOTH =With differences ShippedReceivedDiffTypes.NONE =No differences ShippedReceivedDiffTypes.RECEIVED_BT_SHIPPED=Received quantity greater than shipped quantity ShippedReceivedDiffTypes.SHIPPED_BT_RECEIVED=Received quantity lower than shipped quantity SideEffectAction.DISCONTINUED =Treatment discontinued SideEffectAction.NONE =None SideEffectAction.OTHER =Other SideEffectAction.REDUCED =Dose Reduced SideEffectAction.RE_CHALLENGE =Re-challenge SideEffectAction.SWITCH =Switch regimen SideEffectGrading.MILD =Mild SideEffectGrading.MODERATE =Moderate SideEffectGrading.SEVERE =Severe SideEffectGrading.VERYSEVERE =Very Severe SideEffectOutcome.DEATH =Death SideEffectOutcome.NOT_RESOLVED=Not resolved SideEffectOutcome.RESOLVED =Resolved SideEffectOutcome.RESOLVING =Resolving SideEffectOutcome.SEQUEALE =Resolved with sequelae SideEffectOutcome.UNKNOWN =Unknown SideEffectSeriousness.CONGENITAL_ANOMALY=Congenital Anomaly SideEffectSeriousness.DEAD =Dead SideEffectSeriousness.DISABILITY=Disability SideEffectSeriousness.HOSPITALIZED=Hospitalized SideEffectSeriousness.LIFE_THREATNING=Life Threatening SideEffectSeriousness.NONE =None SideEffectSeriousness.OTHER =Other Source =Medicine Source StoragePosReport.bufferStorage=Available stock (months) StoragePosReport.lastMovement =Last movement StoragePosReport.nextExpirationBatch=Next batch to expire Substance =Medicine generic name Substance.dstResultForm =Include in DST results form Substance.prevTreatmentForm =Include in previous treatments form Suspect.name = SuspectFollowUp.CONFIRMED =Eligible for Second Line SuspectFollowUp.NOT_CONFIRMED =Not eligible for Second Line SystemConfig.adminMail =System administrator e-mail SystemConfig.allowRegPage =Allow user self-registration at login page SystemConfig.pageRootURL =Page root URL SystemConfig.systemMail =System e-mail SystemConfig.systemURL =System URL Tag.autogenerated =Auto generated tag Tag.consistencyCheck =Consistency Data Check Tag.dailyUpdate =Daily update Tag.sqlCondition =SQL condition TbCase =TB/DR-TB Case TbCase.age =Age TbCase.aids =AIDS TbCase.aidsART =is on ART TbCase.aidsCotrimoxasol =is on cotrimoxasol TbCase.aidsVCT =Received VCT TbCase.alcoholAbuse =Alcohol abuse TbCase.closestContact =Closest contact TbCase.diagnosisDate =Diagnosis date TbCase.eidsscomment = TbCase.eidssid = TbCase.endTreatmentDate =Finish treatment date TbCase.healthUnits =Treatment health units TbCase.iniTreatmentDate =Start treatment date TbCase.mobileNumber =Next of Kin's Phone Number TbCase.notifAddressChanged =Current address is different from home address? TbCase.notificationUnit =Notification Health Unit TbCase.notificationUnit.add =Add Health Facility Name TbCase.otherOutcome =Specify TbCase.outcomeDate =Result Date TbCase.ownerUnit = TbCase.ownerUnitAdr = TbCase.patientAge =Age TbCase.patientContactName =Patient name TbCase.patientTypeOther =Which type? TbCase.phoneNumber =Client Phone Number TbCase.referToOtherTBUnit = TbCase.regimen =Current regimen TbCase.regimenIni =Initial regimen TbCase.registrationCode =Registration Code TbCase.registrationDate =Registration date TbCase.supervisedTreatment =Supervised Treatment TbCase.suspectRegistrationCode=Suspect registration code TbCase.suspectType =Suspect Type TbCase.tbContact =Possible Source of Infection TbContact.conduct =Action Plan TbContact.contactType =Type of contact TbContact.dateofexamination = TbContact.examined =Examined TbContact.name =Contact's name TbContact.samplesent =Sample sent for Culture / DST test? TbContact.samplesent.culture =Sample sent for Culture test? TbContact.samplesent.dst =Sample sent for DST test? TbContact.tbsymptom =Has TB Symptom? TbField =TB field TbField.ADJUSTMENT =Reason for Adjustment TbField.ANOTHERTB = TbField.ART_REGIMEN =ART Regimen TbField.COMORBIDITY =Comorbidity and associated factors TbField.CONTACTCONDUCT =Conducts for contact TbField.CONTACTTYPE =Type of Contacts TbField.CULTURE_METHOD =Method used in culture exams TbField.DIAG_CONFIRMATION =Diagnosis confirmed by TbField.DST_METHOD =Method used in DST exams TbField.EDUCATIONAL_DEGREE =Educational degree TbField.EXTRAPULMONARY_TYPES =Extrapulmonary forms TbField.IDENTIFICATION =Identification TbField.MARITAL_STATUS = TbField.MOLECULARBIOLOGY_METHOD=Molecular Biology Method TbField.PHYSICAL_EXAMS =Phisical exams TbField.POSITION =Social status TbField.PULMONARY_TYPES =Chest X-Ray TbField.REGISTRATION_CATEGORY =Category of supervision TbField.SEVERITY_MARKS = TbField.SIDEEFFECT =Adverse Reaction TbField.SMEAR_METHOD =Method used in smear exams TbField.SUSPECT_CRITERIA =Criteria For Suspects TbField.SYMPTOMS =Symptoms TbField.TBDETECTION =TB Decection method TbField.XRAYPRESENTATION =X-Ray Presentation TbField.XRAY_LOCALIZATION =X-Ray Localizations Tbunit =TB Unit Tbunit.address =Address Tbunit.addressCont =Address (complement) Tbunit.authorizeOrder =Requires authorization before medicine order shipment Tbunit.authorizerUnit =Order authorizer Tbunit.batchControl =Batch control Tbunit.changeEstimatedQuantity=Allows to change the estimated quantity on orders Tbunit.firstLineSupplier =1st line medicine supplier Tbunit.locality =Locality Tbunit.mdrHealthUnit =DR-TB treatment center Tbunit.medManStartDate =Starting date of medicine management Tbunit.medicineStorage =Unit stores medicines Tbunit.medicineSupplier =Unit is a medicine supplier to other units Tbunit.ntmHealthUnit =NTM Health Unit Tbunit.numDaysOrder =Number of days for medicine consumption estimation Tbunit.orderOverMinimum =Orders medicines over minimum buffer stock Tbunit.patientDispensing =Register dispensing by patient Tbunit.receivingFromSource =Unit receives medicines from medicine sources Tbunit.secondLineSupplier =2nd line medicine supplier Tbunit.tbHealthUnit =TB treatment center Tbunit.treatmentHealthUnit =Treatment health unit Tbunit.zipCode =ZIP Transfer.commentsFrom =Comments from the sending unit Transfer.commentsTo =Comments from the receiving unit Transfer.receivingDate =Receiving date Transfer.shippingDate =Shipping date Transfer.unitFrom =From Transfer.unitTo =To TransferStatus =Transfer status TransferStatus.CANCELLED =Canceled TransferStatus.DONE =Received TransferStatus.WAITING_RECEIVING=Waiting for receiving TreatMonitoringInput.DETAILED =Detailed TreatMonitoringInput.SIMPLE =Simple TreatmentDayOption.DOTS =DOT TreatmentDayOption.NOT_TAKEN =Not taken TreatmentDayOption.SELF_ADMIN =Self Administered TreatmentHealthUnit.endDate =Finish Date TreatmentHealthUnit.iniDate =Start date User =User User.email =e-mail User.language =Language User.login =Login User.name =Name User.password =Password User.playOtherUnits =Perform activities of other units User.profiles =User's profiles User.region =Region User.sendSystemMessages =Send system messages in certain events User.state =State User.timeZone =Time zone UserLogin.application =Browser information UserLogin.ipAddress =IP address UserLogin.loginDate =Login date UserLogin.logoutDate =Logout date UserPermission =Permission UserPermission.allow =Allowed UserPermission.canChange =Change UserPermission.canExecute =Execute UserPermission.canOpen =Open UserPermission.grantPermission=Grant UserProfile =User profile UserRole =Event UserState =User Status UserState.ACTIVE =Active UserState.BLOCKED =Blocked UserState.PASSWD_EXPIRED =Password expired UserView =User View UserView.ADMINUNIT =Administrative unit UserView.COUNTRY =Whole country UserView.LOCALITY =Locality UserView.REGION =Region UserView.TBUNIT =Health Unit ValidationState =Validation Status ValidationState.PENDING =Pending ValidationState.PENDING_ANSWERED=Pending answered ValidationState.VALIDATED =Validated ValidationState.WAITING_VALIDATION=Not validated Workspace =Workspace Workspace.ExpiredMedAdjustType=Reason for adjustment of medicine expiring Workspace.allowDiagAfterTreatment=Allows diagnosis date to be after beginning of treatment Workspace.allowRegAfterDiagnosis=Allows registration date to be after diagnosis date Workspace.alternateLocale =Alternate language Workspace.defaultLocale =Default language Workspace.defaultTimeZone =Default time zone Workspace.extension =Extension country code Workspace.maxStockOnHand =Maximum months of stock Workspace.minStockOnHand =Minimum months of stock Workspace.monthsToAlertMedicineExpires=Early alert for medicine expiring Workspace.patientAddrRequiredLevels=Required levels for patient address Workspace.picture =Workspace picture Workspace.sendSystemMessages =Allow system to send messages to users on certain events Workspace.startDRTBTreatBeforeValidation=Start DR-TB treatment before validation Workspace.startTBTreatBeforeValidation=Start TB treatment before validation Workspace.treatMonitoringInput=Medicine in-take monitoring Workspace.ulaActive =Users must accept the User Licence Agreement upon login (only once) XRayBaseline =Baseline x-ray XRayBaseline.CAVITARY =Cavitary XRayBaseline.INFILTRATE =Infiltrate XRayBaseline.NORMAL =Normal XRayBaseline.ONGOING =Pending XRayBaseline.OTHER =Other XRayEvolution =Succeding x-ray XRayEvolution.IMPROVED =Improved XRayEvolution.NA =No data to compare XRayEvolution.PROGRESSED =Progressed XRayEvolution.STABLE =Stable XRayResult =X-Ray result XRayResult.NEGATIVE =Negative dynamics XRayResult.NO_CHANGE =No changes XRayResult.POSITIVE =Positive dynamics XRayResult.STABILIZED =Stabilized XpertResult =Xpert result XpertResult.ERROR =Error XpertResult.INVALID =Invalid XpertResult.NO_RESULT =No result XpertResult.ONGOING =On going XpertResult.TB_DETECTED =TB detected XpertResult.TB_NOT_DETECTED =TB not detected XpertRifResult.RIF_DETECTED =RIF Resistance Detected XpertRifResult.RIF_INDETERMINATE=RIF Resistance Indeterminate XpertRifResult.RIF_NOT_DETECTED=RIF Resistance Not Detected adm.modifyReceivingDate =Modify the receiving date of an order admin =Administration admin.adminunits =Administrative units admin.adminunits.countrystructure=Administrative unit admin.adminunits.delerror1 =User cannot delete its own administrative unit admin.adminunits.editparent =modify parent unit admin.adminunits.edt =Edit administrative unit data admin.adminunits.maxlevel =Maximmum level reached admin.adminunits.new =New administrative unit admin.adminunits.noparentunit =no parent unit admin.adminunits.parentunit =Parent unit admin.adminunits.sameasparent =The administrative unit can't be its own parent admin.adminunits.subunits =Subunits admin.ageranges =Age ranges admin.ageranges.edt =Edit age range admin.ageranges.msgerror1 =The initial age must be less than the final age admin.ageranges.msgerror2 =There is already an age range recorded with the same values admin.ageranges.new =New age range admin.auorg =Administrative Unit Organization admin.auorg.edt =Edit administrative unit division admin.auorg.new =New administrative unit division admin.clinicalforms =Clinical forms admin.clinicalforms.edt =Edit clinical form admin.clinicalforms.new =New clinical form admin.config =Settings admin.desc =Allows to manage the system in order to add, remove and change users, health system structure, medicines, treatment regimens and other features admin.errorlogreport.title =Error message admin.fields =TB field values admin.fields.edt =Edit TB field value admin.fields.new =New TB field value admin.groups =Medicine groups admin.groups.edt =Edit medicine group data admin.groups.new =New medicine group admin.healthsys =Health systems admin.healthsys.delerror1 =User cannot delete its own health system admin.healthsys.edt =Edit health system data admin.healthsys.new =New health system admin.import =Import data admin.import.charset =Charset admin.import.delimiter =Delimiter char admin.import.desttable =Destination table admin.import.eidss = admin.import.eidss.auto = admin.import.eidss.check = admin.import.eidss.default_user= admin.import.eidss.diags = admin.import.eidss.from = admin.import.eidss.interval_deepdays= admin.import.eidss.interval_timer= admin.import.eidss.language = admin.import.eidss.login = admin.import.eidss.nextFT = admin.import.eidss.nextFT.undef= admin.import.eidss.org = admin.import.eidss.password = admin.import.eidss.srart_date = admin.import.eidss.state = admin.import.eidss.state.off = admin.import.eidss.state.on = admin.import.eidss.states = admin.import.eidss.stop = admin.import.eidss.timeout = admin.import.eidss.toDate = admin.import.eidss.url = admin.import.file =CSV File admin.import.table = admin.labs =Laboratories admin.labs.edt =Edit laboratory data admin.labs.new =New laboratory admin.medicines =Medicines admin.meds.new =New medicine admin.presentations =Dosage forms admin.presentations.edit =Edit dosage form admin.presentations.new =New dosage form admin.profiles =User's profiles admin.profiles.delerror1 =User cannot delete its own profile admin.profiles.edt =Edit User Profile admin.profiles.new =New user profile admin.regimens =Treatment regimens admin.regimens.edt =Edit Treatment regimen admin.regimens.new =New treatment regimen admin.reports =Reports admin.reports.eventlog =Event Log admin.reports.transactionstats=Transaction statistics admin.reports.usersession =User Session History admin.reports.usersession.info=User session details admin.setup =Setup admin.sources =Medicine sources admin.sources.edit =Edit medicine source admin.sources.new =New medicine source admin.substances =Medicine generic names admin.substances.edt =Edit medicine generic name admin.substances.new =New generic name admin.syssetup =e-TB Manager setup admin.syssetup.success =System configuration successfully changed admin.tables =Tables admin.tags =Case tags admin.tags.conderror =Invalid SQL condition admin.tags.edt =Tag data admin.tags.new =New tag admin.tbunits =TB Units admin.tbunits.casestrans =Transfer cases to another unit admin.tbunits.delerror1 =User cannot delete its own TB unit admin.tbunits.medmanagement =Medicine management admin.tbunits.medsuppliers =Medicine supplier admin.tbunits.new =New pharmacy storage admin.tbunits.ordershipping =Medicine order shipping to other units admin.tbunits.remuserunit =You cannot delete the health unit you belong to admin.tbunits.userstrans =Transfer users to another unit admin.users =Users admin.users.confirmnewpass =A new password will be sent to the user e-mail address. Confirm? admin.users.delerror1 =A user cannot delete himself from the system admin.users.new =New user admin.users.newpasswd =Send new password admin.users.remove =Remove admin.users.reqlogin =Invalid login (it cannot contain spaces and cannot be shorter than 4 characteres) admin.users.uniquelogin =There is already an user recorded with this login admin.websessions =On-line users admin.websessions.id =Login ID admin.websessions.idletime =Idle time admin.websessions.lastpage =Last page admin.websessions.lastrequest =Last request admin.websessions.sessiontime =Session time admin.weeklyfreq =Weekly frequencies admin.weeklyfreq.edt =Edit Weekly frequencies data admin.workspaces =Workspaces admin.workspaces.addeduser =Added user admin.workspaces.cases =Case management module settings admin.workspaces.casevalidation=Case validation settings admin.workspaces.clearimg =Clear image admin.workspaces.copied =Workspace data was successfully copied admin.workspaces.copy =Copy data from another workspace admin.workspaces.copy.obs =Dependencies will also be copied even if they are not selected admin.workspaces.copy.selcopied=Data copied admin.workspaces.copy.selection=Select the data to be copied admin.workspaces.copy.sourcews=Source workspace to copy from admin.workspaces.delerror1 =User cannot delete its own workspace admin.workspaces.edt =Edit workspace data admin.workspaces.medicine =Medicine management module settings admin.workspaces.new =New workspace admin.workspaces.newimage =New image file admin.workspaces.noimage =No image available admin.workspaces.removeduser =Removed user admin.workspaces.starttreatbefore=Allow treatment starts before the diagnosis date for confirmed cases admin.workspaces.userexists =User is already in the workspace admin.workspaces.users =Workspace users autotask =Automated Task az_EIDSS_Address = az_EIDSS_Age = az_EIDSS_Binded = az_EIDSS_Not_Binded = az_EIDSS_Note = az_EIDSS_Notify_LPU = az_EIDSS_REGDATE = az_EIDSS_Search = az_EIDSS_Section = az_EIDSS_Year_Of_Birth = case.currweight =Current Weight case.inicialweight =Inicial Weight cases =Cases cases.advancedsearch =Advanced Search cases.begindaterequired =The start treatment date must be informed cases.casesearching =Case searching cases.casesearching.dterror =The selected period is invalid cases.casesearching.filterdates=Case search by dates cases.casesearching.order =Ordering cases.casesearching.patient =Patient name cases.casesearching.treatlen =Treatment duration cases.close =Close case cases.close.msg1 =The finish date cannot be before the diagnosis date cases.close.msg2 =The outcome date can't be after the end of treatment date. cases.closed =Closed cases.comments.add =Add a comment cases.comorbidities =Comorbidities and associated factors cases.confirmedNotOnTreatment =Confirmed Not on Treatment cases.confirmedOnTreatment =Confirmed DR-TB patients on treatment cases.contacts =Contacts Evaluation cases.deadbefore =Invalid date. Patient outcome was registered as died on {0} cases.desc =Allows to search, notify, follow, close, transfer and validate cases cases.details =Details cases.details.addresscurr =Current address cases.details.addressnotif =Patient address at the moment of notification cases.details.addressnotif.AZ = cases.details.addrresscurr.abbrev=Curr. Addr. cases.details.agenda =Agenda cases.details.allres =Show all results cases.details.case =Case data cases.details.currhist =Present history cases.details.date =Date cases.details.exams =Exams cases.details.incaseofemerg =In case of emergency cases.details.lastres =Show last result cases.details.medexam =Medical consultation cases.details.msgall =All results cases.details.msglast =Last result cases.details.newconsult =New consultation cases.details.newresult =New cases.details.noresultfound =No result found cases.details.notreatment =Treatment not started cases.details.otherinfo =Additional information cases.details.others =Other cases of cases.details.report1 =Drugogram cases.details.report1.sample =Sample ID cases.details.report1.tit =AFB/Cult cases.details.result =Result cases.details.starttreatment =Start treatment cases.details.treatment =Treatment cases.details.valerror1 =The diagnosis date cannot be before the registration date cases.detailseidsstitle = cases.detailstitle = cases.disp.types =*Directly Observed (O), Not supervised (N) or Drugs not taken (X) cases.edit =Edit case cases.examculture =Culture cases.examdst =Drug susceptibility test (DST) and line probe assay (LPA) cases.examhiv =HIV cases.examhiv.art =Started on ART ? cases.examhiv.artperc = cases.examhiv.cpt =Started on CPT ? cases.examhiv.cptperc = cases.examhiv.vct =VCT was done? cases.exammicroscopy =Microscopy cases.exams.afb =Report number of AFB cases.exams.date =Date collected cases.exams.datePlating = cases.exams.dateRelease =Date of release cases.exams.datereleasebeforecol=The date of release cannot be before the collected date cases.exams.datesampleexists =There is already an exam registered with the same sample ID or collected date cases.exams.method =Method applied cases.exams.prevdt =Before TB Diagnosis cases.exams.results =Exam result information cases.exams.selsample =Select available sample cases.exams.zero =Month of Diagnosis cases.examxpert =Xpert MTB/RIF test cases.examxray =X-Ray cases.filterserror =You have to select at least one type of diagnosis and one classification. cases.generaldata =Case data cases.healthUnit =Health Unit cases.hivexams.artregimen =ART Regimen cases.hivexams.cd4 =CD4 count (if done) cases.hivreport = cases.hivresult =HIV Test Result cases.issues =Issues cases.issues.new =New issue cases.mantreatment =Treatment progress cases.mantreatmentplaned = Planned Treatment Progress cases.actualtreatprogr = Actual treatment progress cases.movdate =Transfer date cases.move =Transfer to another health unit cases.move.cancel =Roll back transfer cases.move.cancel-confirm =Do you really want to roll back the transfer in to unit {0} cases.move.errordt-transferin =The date of transfer in cannot be before the date of transfer out from the previous health unit cases.move.errortreatdate =Transfer date must be inside the treatment period of the current health unit cases.move.errorunit =The transferred health unit is the same treatment health unit cases.move.notreat =Cannot transfer because case is not under treatment in the entered date cases.move.regtransferin =Register transfer in cases.move.rollback =Transfer rolled back cases.move.success =The case was successfully transferred cases.move.success-transferin =Case was successfully transferred into the health unit cases.move.transferin-date =Date of transfer in cases.na.prefix = cases.new =New case cases.new.birthdatereq =The birth date is required cases.new.datareq = cases.new.gonotif =Go to notification form cases.new.msg =Patient was not found in the list below cases.new.namereq =Patient name is required cases.new.selpatient =Select a patient to be notified cases.newnotif =New notification cases.newnotif.title =Select the appropriate classification of the case cases.newnotiftitle = cases.newpatient =New patient cases.newregimen =Add new regimen cases.newsearch =New search cases.newsusp =New suspect cases.nonumber =Unnumbered cases.noregimen =No treatment regimen defined for this case cases.ongoing =On-going cases cases.ongoing.notifs =Cases notified cases.ongoing.notontreat =Not on treatment cases.outcome =Outcome cases.patientdata =Patient data cases.pending =Issues in the case cases.pending.answer =Answer pendings cases.pending.answermsg =Enter an answer to the issue above cases.pending.email.msg01 =New pending registered cases.pending.email.msg02 =A case pending has been answered cases.pending.email.msg03 =A new pending was registered for the case below cases.pending.email.msg04 =The pending of the case below has been answered cases.pending.email.msg05 =Pending details cases.pending.email.msg06 =Answer details cases.pending.email.msg07 =For more details about the case, click on the link below cases.pending.lastIssue =Last issue posted cases.pending.msg =The information in this case have not been validated. It is pending cases.pending.notify =Post pendings cases.pending.pendingmsg =Enter the field below with the description of the pending cases.prevtreat =Previous TB treatments cases.prevtreat.date =Start month/year cases.prevtreat.meds =Medicines used during the treatment cases.prevtreat.num =# cases.prevtreat.numprev =Number of previous TB treatments cases.prevtreat.regs =Mark \u201cX\u201d in the boxes below for the medicines used during the treatment cases.print =Print whole case cases.regimens =Treatment regimens cases.regimens.addmed =Add medicine cases.regimens.change =Change regimen cases.regimens.changeperiod =Change period cases.regimens.dateafter =The end date cannot be after {0} cases.regimens.datebefore =The start regimen date cannot be before {0} cases.regimens.dates =Change regimen period cases.regimens.edt =Edit treatment regimen cases.regimens.errordateus =The start date is not compatible with the health unit cases.regimens.msg1 =The regimen phase must be entered cases.regimens.phasereq =The regimen phase is required cases.regimens.remove =Delete regimen cases.regimens.spdtrequired =The splitting date is required cases.regimens.split =Split period cases.regimens.splitdate =Splitting date cases.regimens.splitmsg =The splitting regimen date must be between the following dates: cases.regimens.splittitle =Split case regimen cases.regimens.splitvalmsg =Invalid date cases.registered =Registered cases cases.regs =Treatment regimens cases.reopen =Reopen case cases.reopen.confirm =Confirm case reopen? cases.searchfor =Search for cases.searchpatient =Search for patient to be notified cases.searchresult =Case search results cases.setregimen =Set regimen cases.sideeffects =Adverse Drug Reactions cases.sideeffects.action =Action Taken cases.sideeffects.desc =Adverse Reaction cases.sideeffects.errormsg1 =The case must be on treatment to register an adverse reaction. cases.sideeffects.grade =Grading cases.sideeffects.grading =Grading cases.sideeffects.grading.mild=Mild (Can recover without ancillary drugs) cases.sideeffects.grading.moderate=Moderate(can manage by ancillary drugs) cases.sideeffects.grading.severe=Severe(recover by switch drugs or stop TB drugs) cases.sideeffects.grading.vsevere=Very Severe(life threatening and need to be hospitalized) cases.sideeffects.medicine =Judged related to cases.sideeffects.month =Month of treatment cases.sideeffects.outcome =Outcome cases.sideeffects.resolved =Resolved? cases.sideeffects.samemonth =It already exists he same side effect for the same month of treatment. cases.sideeffects.sameperiod =It already exists a same side effect registere with a period that intercedes the period specified. cases.sideeffects.seriousness =Seriousness cases.sit.CONF.date =Diagnosed in {0} cases.sit.ONTREAT.date =On treatment since {0} cases.sit.OUTCOME.date =Finished in {0} cases.sit.SUSP =Waiting for confirmation cases.sit.SUSP.date =Registered in {0} cases.sit.current =Latest case cases.suspect.details.addressnotif=Client home address at the moment of notification cases.suspect.followup =Suspect follow-up cases.suspectOnTreatment =Suspects on treatment cases.suspectdata =Suspect's Bio-Data cases.suspectnotifdata =Suspect's Notification Data cases.toBeNotified =to be notified cases.transferin.mail =A new patient transfer was recorded in EtbManager from the unit cases.transferin.mail2 =For more details about the case and to register the transference, click on the link below cases.trasnferin =Transferred in cases.trasnferout =Transferred out cases.treat =Treatment period cases.treat.contdateerror =The initial date of the continuous phase must be inside the treatment period cases.treat.contphase =Medicine intake during continuation phase cases.treat.dates =Change treatment period cases.treat.deletedperiod =Removed period cases.treat.disp =Administered (days) cases.treat.dispedt =Register medicine intake cases.treat.dtmsg1 =The end date is required cases.treat.inidatemsg =The treatment start date cannot before the diagnosis date cases.treat.interrupt =Interrupt medicine treatment cases.treat.intphase =Medicine intake during intensive phase cases.treat.mdr =DR-TB treatment cases.treat.phaseerror =Invalid regimen phase for the selected period cases.treat.presc =Prescribed (days) cases.treat.preservePreviousPeriod=Preserve previous period for this medicine cases.treat.regmovedtoindivid =Medicines not compatible with regimen currently prescribed. If confirmed, regimen will be change to individualized. cases.treat.selreg =Select the treatment regimen cases.treat.started =Patient has already started treatment cases.treat.startperiod =Treatment start period cases.treat.tb =TB treatment cases.treat.undo =Undo treatment cases.treat.undo.confirm =Do you really want to undo treatment? All treatment information will be erased cases.treat.undo.executed =The treatment was successfully undone cases.treat.validatebefore =The validation must be done prior to start the treatment cases.treated =Cases on treatment or treated before cases.validate =Validate case cases.validate.confirm =Confirm validation of the case? cases.validate.msg =Please confirm the information below before validate the case cases.validate.success =The case was successfully validated changepwd =Change password changepwd.expiredmsg =You have to enter a new password in order to continue changepwd.hint1 =Password length must be at least 6 characteres long and contain at least one digit and letter changepwd.invalidpassword =Invalid password changepwd.msg1 =Inform your password in use and the new one changepwd.newpass =New password changepwd.newpass2 =Confirm new password changepwd.passinuse =Password in use changepwd.success1 =The password was successfully changed! changepwd.success2 =It shall be used in the next time you log in the system changepwd.wrongpass1 =The password in use is not correct changepwd.wrongpass2 =The confirmed password and the new password are not the same charts =Chart type charts.hbar =Horizontal bar charts.pie =Pie com.sun.faces.APPLICATION_ASSOCIATE_CTOR_WRONG_CALLSTACK=ApplicationAssociate ctor not called in same callstack as ConfigureListener.contextInitialized(). com.sun.faces.APPLICATION_ASSOCIATE_EXISTS=ApplicationAssociate already exists for this webapp. com.sun.faces.APPLICATION_INIT_COMPLETE_ERROR_ID=ELResolvers cannot be added after the application initialization is complete. com.sun.faces.ASSERTION_FAILED=Assertion Failed com.sun.faces.ATTRIBUTE_NOT_SUPORTED=Attribute ''{0}'' not supported for component type ''{1}''. com.sun.faces.CANNOT_CONVERT =Unable to resolve a Converter instance using either converterId ''{0}'' or binding ''{1}''. com.sun.faces.CANNOT_VALIDATE =Unable to resolve a Validator instance using either validatorId ''{0}'' or binding ''{1}''. com.sun.faces.CANT_CLOSE_INPUT_STREAM=Unable to close input stream. com.sun.faces.CANT_CONVERT_VALUE=Can''t convert property: ''{0}'' to value type: ''{1}''. com.sun.faces.CANT_CREATE_LIFECYCLE_ERROR=Can''t create Lifecycle for id: ''{0}''. com.sun.faces.CANT_INSTANTIATE_CLASS=Can''t instantiate class: ''{0}''. com.sun.faces.CANT_INTROSPECT_CLASS=Can''t introspect class: ''{0}'' com.sun.faces.CANT_PARSE_FILE =Can''t parse file: ''{0}'': Error at line {1} column {2}: {3}. com.sun.faces.CANT_WRITE_ID_ATTRIBUTE=Can''t write ID attribute: ''{0}''. com.sun.faces.CHILD_NOT_OF_EXPECTED_TYPE=Expected a child component type of ''{0}'' for component type ''{1}({2})''. Found ''{3}''. com.sun.faces.COMMAND_LINK_NO_FORM_MESSAGE=: This link is disabled as it is not nested within a JSF form. com.sun.faces.COMPONENT_NOT_FOUND_ERROR=Component Not Found for identifier: ''{0}''. com.sun.faces.COMPONENT_NOT_FOUND_IN_VIEW_WARNING=Unable to find component with ID ''{0}'' in view. com.sun.faces.CONFIG_RENDERER_REGISTRATION_MISSING_RENDERKIT=Unable to register renderers with RenderKit using id {0}. RenderKit does not exist. com.sun.faces.CONTENT_TYPE_ERROR=Unrecognized Content Type. com.sun.faces.CYCLIC_REFERENCE_ERROR=Managed bean ''{0}'' contains cyclic references. Evaluation path: ''{1}''. com.sun.faces.DUPLICATE_COMPONENT_ID_ERROR=Component ID ''{0}'' has already been found in the view. See below for details. com.sun.faces.EMPTY_PARAMETER =Parameter is empty com.sun.faces.ENCODING_ERROR =Unrecognized Character Encoding. com.sun.faces.ERROR_GETTING_VALUEREF_VALUE=Can''t get value from value binding expression: ''{0}''. com.sun.faces.ERROR_GETTING_VALUE_BINDING=Can''t get ValueBinding for value: ''{0}''. com.sun.faces.ERROR_OPENING_FILE=Can''t open configuration file: ''{0}''. com.sun.faces.ERROR_PROCESSING_CONFIG=An unexpected error occurred during configuration processing. com.sun.faces.ERROR_REGISTERING_DTD=Can''t register DTD: ''{0}''. com.sun.faces.ERROR_SETTING_BEAN_PROPERTY=Can''t set managed bean property: ''{0}''. com.sun.faces.EVAL_ATTR_UNEXPECTED_TYPE=Evaluation of expression for attribute ''{0}'' resulted in unexpected type. Expected {1}, but received {2}. com.sun.faces.FACES_CONTEXT_CONSTRUCTION_ERROR=Construction Error: One or more input parameters may be null. com.sun.faces.FACES_CONTEXT_NOT_FOUND=No FacesContext is available to process this request. This is most likely due to the request being sent to the wrong path. com.sun.faces.FACES_SERVLET_MAPPING_CANNOT_BE_DETERMINED=Unable to determine FaceServlet mapping for servlet path ''{0}''. com.sun.faces.FACES_SERVLET_MAPPING_INCORRECT=The FacesServlet cannot have a url-pattern of '/*'. Please define a different url-pattern. com.sun.faces.FILE_NOT_FOUND =File Not Found for file: ''{0}''. com.sun.faces.ILLEGAL_ATTEMPT_SETTING_STATEMANAGER=Illegal attempt to set StateManager after a response has been generated. com.sun.faces.ILLEGAL_ATTEMPT_SETTING_VIEWHANDLER=Illegal attempt to set ViewHandler after a response has been generated. com.sun.faces.ILLEGAL_CHARACTERS_ERROR=Characters not allowed. com.sun.faces.ILLEGAL_IDENTIFIER_LVALUE_MODE=Illegal use of implicit object identifier in lValue mode: ''{0}'' com.sun.faces.ILLEGAL_MODEL_REFERENCE=Illegal Model Reference in this context for expression ''{0}''. com.sun.faces.ILLEGAL_VIEW_ID =Illegal view ID ''{0}''. The ID must begin with ''/'' com.sun.faces.INCORRECT_JSP_VERSION=It appears the JSP version of the container is older than 2.1 and unable to locate the EL RI expression factory, ''{0}''. If not using JSP or the EL RI, make sure the context initialization parameter, ''{1}'', is properly set. com.sun.faces.INVALID_EXPRESSION=Invalid expression: ''{0}''. com.sun.faces.INVALID_INIT_PARAM=Invalid value: ''{0}'', for initialization parameter: ''{1}''. Acceptable values are 'true' or 'false'. Defaulting to 'false'. com.sun.faces.INVALID_MESSAGE_SEVERITY_IN_CONFIG=Invalid Message severity ''{0}'' defined in configuration. com.sun.faces.INVALID_SCOPE_LIFESPAN=The scope of the object referenced by expression ''{0}'', ''{1}'', is shorter than the referring managed bean''s (''{2}'') scope of ''{3}'' com.sun.faces.JS_RESOURCE_WRITING_ERROR=Can''t write the JavaScript file to client. com.sun.faces.LIFECYCLE_ID_ALREADY_ADDED=LifecycleId already added for id: ''{0}''. com.sun.faces.LIFECYCLE_ID_NOT_FOUND=LifecycleId not found for id ''{0}''. com.sun.faces.MANAGED_BEAN_AS_LIST_CONFIG_ERROR=Incorrect configuration for managed bean ''{0}''. The managed bean is configured as a List, but also attempts to define map entries or managed properties. com.sun.faces.MANAGED_BEAN_AS_MAP_CONFIG_ERROR=Incorrect configuration for managed bean ''{0}''. The managed bean is configured as a Map, but also attempts to define managed properties. com.sun.faces.MANAGED_BEAN_CANNOT_SET_LIST_ARRAY_PROPERTY=Unable to set target property ''{0}'' in managed bean ''{1}''. The property must accept either List or Array instances. com.sun.faces.MANAGED_BEAN_CLASS_DEPENDENCY_NOT_FOUND_ERROR=Bean or property class ''{0}'' for managed bean ''{1}'' cannot be loaded due to a missing dependency: {2}. com.sun.faces.MANAGED_BEAN_CLASS_IS_ABSTRACT_ERROR=Managed bean class ''{0}'' for managed bean ''{1}'' is declared as abstract or as an interface. com.sun.faces.MANAGED_BEAN_CLASS_IS_NOT_PUBLIC_ERROR=Managed bean class ''{0}'' for managed bean ''{1}'' is not declared public. com.sun.faces.MANAGED_BEAN_CLASS_NOT_FOUND_ERROR=Bean or property class ''{0}'' for managed bean ''{1}'' cannot be found. com.sun.faces.MANAGED_BEAN_CLASS_NO_PUBLIC_NOARG_CTOR_ERROR=Managed bean class ''{0}'' for managed bean ''{1}'' doesn't declare a public no-argument constructor. com.sun.faces.MANAGED_BEAN_DEFINED_PROPERTY_CLASS_NOT_COMPATIBLE_ERROR=The property ''{0}'' for managed bean ''{1}'' is defined with a property class of ''{2}'', however, this class is not assignable to the property. com.sun.faces.MANAGED_BEAN_EXISTING_VALUE_NOT_LIST=Unable to set target property ''{0}'' in managed bean ''{1}''. The target property returned an existing value that was not an instance of List. com.sun.faces.MANAGED_BEAN_INJECTION_ERROR=An error occurred performing resource injection on managed bean ''{0}'' com.sun.faces.MANAGED_BEAN_INTROSPECTION_ERROR=Unable to Introspect managed bean ''{0}'' com.sun.faces.MANAGED_BEAN_LIST_GETTER_ARRAY_NO_SETTER_ERROR=Property ''{0}'' in managed bean ''{1}'' is defined as a list property. The getter returns an array type, but there is no associated setter. com.sun.faces.MANAGED_BEAN_LIST_PROPERTY_CONFIG_ERROR=Incorrect configuration for managed bean ''{0}''. The managed bean contains a managed property named ''{1}'' with list entries, but has illegally defined a value and/or map entries. com.sun.faces.MANAGED_BEAN_LIST_SETTER_DOES_NOT_ACCEPT_LIST_OR_ARRAY_ERROR=Property ''{0}'' in managed bean ''{1}'' is defined as a list property, however, the setter in the class does not accept List or Array instances. com.sun.faces.MANAGED_BEAN_LIST_SETTER_DOES_NOT_RETURN_LIST_OR_ARRAY_ERROR=Property ''{0}'' in managed bean ''{1}'' is defined as a list property, however, the getter in the class does not return List or Array instances. com.sun.faces.MANAGED_BEAN_MAP_PROPERTY_CONFIG_ERROR=Incorrect configuration for managed bean ''{0}''. The managed bean contains a managed property named ''{1}'' with map entries, but has illegally defined a value as well. com.sun.faces.MANAGED_BEAN_MAP_PROPERTY_INCORRECT_GETTER_ERROR=Property ''{0}'' in managed bean ''{1}'' is defined as a map property, however, the getter in the class does not return Map instances. com.sun.faces.MANAGED_BEAN_MAP_PROPERTY_INCORRECT_SETTER_ERROR=Property ''{0}'' in managed bean ''{1}'' is defined as a map property, however, the setter in the class does not accept Map instances. com.sun.faces.MANAGED_BEAN_PROBLEMS_ERROR=Unable to create managed bean ''{0}''. The following problems were found: com.sun.faces.MANAGED_BEAN_PROBLEMS_STARTUP_ERROR=JSF will be unable to create managed bean ''{0}'' when it is requested. The following problems where found: com.sun.faces.MANAGED_BEAN_PROPERTY_CONFIG_ERROR=Incorrect configuration for managed bean ''{0}''. The managed bean contains a managed property named ''{1}'' containing no list or map entires, nor any value elements. com.sun.faces.MANAGED_BEAN_PROPERTY_DOES_NOT_EXIST_ERROR=Property ''{0}'' for managed bean ''{1}'' does not exist. com.sun.faces.MANAGED_BEAN_PROPERTY_HAS_NO_SETTER_ERROR=Property ''{0}'' for managed bean ''{1}'' has no setter. com.sun.faces.MANAGED_BEAN_PROPERTY_INCORRECT_ARGS_ERROR=Property ''{0}'' for managed bean ''{1}'' accepts more than one argument com.sun.faces.MANAGED_BEAN_PROPERTY_UNKNOWN_PROCESSING_ERROR=Unexpected error processing managed property ''{0}'' com.sun.faces.MANAGED_BEAN_TYPE_CONVERSION_ERROR=Error performing conversion of value ''{0}'' of type ''{1}'' to type ''{2}'' for managed bean ''{3}''. com.sun.faces.MANAGED_BEAN_UNABLE_TO_SET_PROPERTY_ERROR=Unable to set property ''{0}'' for managed bean ''{1}'' com.sun.faces.MANAGED_BEAN_UNKNOWN_PROCESSING_ERROR=Unexpected error processing managed bean ''{0}'' com.sun.faces.MAXIMUM_EVENTS_REACHED=Maximum number of events ''{0}'' reached. com.sun.faces.MISSING_CLASS_ERROR=Missing Class: Can''t load class ''{0}''. com.sun.faces.MISSING_RESOURCE_ERROR=Missing Resource: Can''t get ResourceBundle. com.sun.faces.MODELUPDATE_ERROR=Model Update failure for value ''{0}'' in model''{1}''. com.sun.faces.NAMED_OBJECT_NOT_FOUND_ERROR=Expression Error: Named Object: ''{0}'' not found. com.sun.faces.NOT_NESTED_IN_FACES_TAG_ERROR=Not nested in a UIComponentTag Error for tag with handler class: ''{0}''. com.sun.faces.NOT_NESTED_IN_TYPE_TAG_ERROR=The {0} tag should be nested within a tag that is associated with a component of type {1}. com.sun.faces.NOT_NESTED_IN_UICOMPONENT_TAG_ERROR=Not nested in a UIComponentTag. com.sun.faces.NO_COMPONENT_ASSOCIATED_WITH_UICOMPONENT_TAG=No component associated with UIComponentTag. com.sun.faces.NO_DTD_FOUND_ERROR=Unable to locate DTD with PUBLIC ID ''{0}'' at path ''{1}''. com.sun.faces.NULL_BODY_CONTENT_ERROR=BodyContent is null for tag with handler class: ''{0}''. com.sun.faces.NULL_COMPONENT_ERROR=Construction Error: Component argument is null. com.sun.faces.NULL_CONFIGURATION=No Configuration loaded for the application. com.sun.faces.NULL_CONTEXT_ERROR=Argument Error: Context argument is null. com.sun.faces.NULL_EVENT_ERROR=Argument Error: Event argument is null. com.sun.faces.NULL_FORVALUE =Component "{0}" not found com.sun.faces.NULL_HANDLER_ERROR=Argument Error: Handler argument is null. com.sun.faces.NULL_LOCALE_ERROR=Argument Error: Locale argument is null. com.sun.faces.NULL_MESSAGE_ERROR=Argument Error: Message parameter cannot be null com.sun.faces.NULL_PARAMETERS_ERROR=Argument Error: Parameter ''{0}'' is null com.sun.faces.NULL_REQUEST_VIEW_ERROR=Argument Error: Request View argument is null. com.sun.faces.NULL_RESPONSE_STREAM_ERROR=Argument Error: ResponseStream argument is null. com.sun.faces.NULL_RESPONSE_VIEW_ERROR=Argument Error: ResponseView argument is null. com.sun.faces.NULL_RESPONSE_WRITER_ERROR=Argument Error: ResponseWriter argument is null. com.sun.faces.OBJECT_CREATION_ERROR=One or more confgured application objects could not be created. Check your web application logs for details. com.sun.faces.OBJECT_IS_READONLY={0} object is read only com.sun.faces.OPTION_NOT_SELECT_ITEM=Argument Error: An option for component ''{0}'' was not an instance of javax.faces.model.SelectItem. Type found: ''{1}''. com.sun.faces.OUT_OF_BOUNDS_ERROR=Index {1} Out of Bounds for {0} com.sun.faces.PHASE_ID_OUT_OF_BOUNDS=PhaseId out of bounds for id: ''{0}''. com.sun.faces.PROPERTY_TYPE_ERROR={0} is not Array or List type. com.sun.faces.RENDERER_NOT_FOUND=Renderer not found for Renderer type: ''{0}''. com.sun.faces.REQUEST_VIEW_ALREADY_SET_ERROR=State Error: RequestView has already been set for this request. com.sun.faces.RESTORE_VIEW_ERROR=View ''{0}'' could not be restored. com.sun.faces.SAVING_STATE_ERROR=Error while saving state. com.sun.faces.SIZE_OUT_OF_BOUNDS_ERROR=Index {1} Out of Bounds for {0} with a length of {2} com.sun.faces.SUPPORTS_COMPONENT_ERROR=Argument Error: ''{0}'' is not supported for this renderer. com.sun.faces.TYPECONVERSION_ERROR=Conversion Error setting value ''{0}'' for ''{1}''. com.sun.faces.VALIDATION_COMMAND_ERROR=Validation error. ''{0}'' must have value or image attribute. com.sun.faces.VALIDATION_EL_ERROR=Validation error. Expression invalid for:''{0}'' com.sun.faces.VALIDATION_ID_ERROR=Validation error. The following JSF tags are required to contain IDs:''{0}'' com.sun.faces.verifier.CLASS_MISSING_DEP=[{0}:{1}] Class cannot be loaded due to a missing dependency -> {2} com.sun.faces.verifier.CLASS_NOT_FOUND=[{0}:{1}] Class does not exist com.sun.faces.verifier.NON_PUBLIC_DEF_CTOR=[{0}:{1}] Class contains a no argument constructor, but it is not public com.sun.faces.verifier.NO_DEF_CTOR=[{0}:{1}] Class contains no public no-argument constructor com.sun.faces.verifier.WRONG_TYPE=[{0}:{1}] Class does not implement or extend {2} default.entity_created =Successfully created default.entity_deleted =Successfully deleted default.entity_updated =Successfully updated desktop.invalidfile =Invalid initialization file desktop.offline =Off line desktop.readfile =Reading file {0} desktop.startup.connecting =Connecting to {0} desktop.startup.download =Downloading data desktop.startup.firsttime =New installation desktop.startup.firsttime.error1=Please select how you want to initialize the database desktop.startup.informallflds =Please inform all fields desktop.startup.inifile =Initialization file desktop.startup.inifile.comp =(containing all cases of the health unit) desktop.startup.inifile.enter =File name (.pkg extension) desktop.startup.initdb =Initializing database. Wait... desktop.startup.internetconn =Direct Internet connection desktop.startup.msg1 =Please select how you want to configure your health unit desktop.startup.quit =Do you really want to quit application? desktop.startup.selectws =select the workspace you want to work with desktop.sync =Synchronize desktop.sync.confirm =Confirm start synchronization with the web server? This operation requires an internet connection. desktop.sync.status =Sync status desktop.sync.step1 =Collecting data to synchronize desktop.sync.step2 =Sending data to server computer desktop.sync.step3 =Waiting for server answer desktop.sync.step4 =Updating database desktop.sync.success =Synchronization executed successfully dispensing.bypatient =Dispensations per patient dispensing.caselist =List of cases with dispensation dispensing.consolidated =Consolidated dispensations dispensing.inibeforeend =The start date must be before the finish date dispensing.new =Enter dispensing dispensing.norecordfound =No dispensing record found dispensing.searchcase =Search cases dispensing.success =Medicine dispensing successfully registered down =\u2193 drugogram.datetitle =Date of the first exam performed within the period drugogram.firstculture =First culture drugogram.firstmicroscopy =First microscopy drugogram.microscopy =Microscopy drugogram.sampleidtitle =Sample ID of the first exam performed within the period edtrec.addmed =Add Medicines edtrec.nobatch ={0}: At least one batch must be entered edtrec.nomedicine =No medicine selected edtrec.qtdbatch ={0}: The entered quantity is different from the sum of all batches edtrec.selmedicines =Select the received medicines eidssFiltres.ownerUnit = error.entityNotFound =The record you're trying to open either was not found or was removed from the system error.msg1 =An unexpected error ocurred. The system administrator will be notified about this error. Please try again later! error.title =Unexpected Error excel.countconsult = excel.counttests = excel.dateInEIDSS = excel.dateRegAfterEIDSS = excel.dst.am = excel.dst.cfx = excel.dst.cm = excel.dst.cs = excel.dst.e = excel.dst.eto = excel.dst.gati = excel.dst.h = excel.dst.km = excel.dst.lfx = excel.dst.mfx = excel.dst.ofx = excel.dst.pas = excel.dst.pto = excel.dst.r = excel.dst.rfb = excel.dst.s = excel.dst.trd = excel.dst.z = excel.fromEIDSS = excel.tests.cult = excel.tests.dst = excel.tests.mol = excel.treat.alldays = excel.treat.reldays = excel.xray.localization = excel.xray.presentation = exceptions.auth =You don't have permission to do this exceptions.optimisticLock =Another user changed the same data, please try again exceptions.val =A validation error occurred... Please try again export_warning_too_many = form.abbrevName =Abbreviated name form.abbrevName2 =Abbreviated name 2 form.accept =Accept form.action =Action form.add =Add form.by =By form.cancel =Cancel form.casedelete =Delete case form.clear =Clear form.clickon.save =Click on the SAVE opion to record changes. form.close =Close form.confirm_remove =Confirm delete? form.confirmnew =Do you really want to start a new forecasting? form.copy =Copy form.customId =Custom ID form.data_edit =Edit form.date =Date form.decline =Decline form.details =Show details form.displayorder =Display order form.duplicatedemail =A record with the same email already exists. Enter an unique value and try again form.duplicatedname =A record with the same value already exists. Enter an unique value and try again form.edit =Edit form.exampleabbrev =e.g., form.exit =Exit form.filters =Filters form.functions = form.generate =Generate form.hidedetails =Hide details form.icd10 =ICD-10 form.id =ID form.import =Import form.information =Information form.inienddate =The finish date must be after the start date form.logreport =Transaction history form.mainmenu =Main menu form.monthyear =month/year form.msgdt1 =The start date cannot be before {0} form.msgdt2 =The finish date cannot be after {0} form.msgdt3 =The start date must be before {0} form.msgdt4 =The finish date must be after {0} form.msgdt5 =The finish date must be before {0} form.msgdt6 =The beginning date must be after {0} form.name =Name form.name2 =Name 2 form.navegpage =Page form.navfirst =First form.navlast =Last form.navnext =Next form.navprevious =Previous form.new =New form.newf =New form.neworedit =New/Edit form.norecordfound =No record found form.noselection =- All - form.noselection2 =- Select a value - form.of =Of form.ok =Ok form.options =Options form.otherfilters =Other filters form.otheroptions =Other options form.otherparameters = form.parameters = form.profile =Change profile form.qttDiff =Differences in quantities form.reason =Reason form.refdate =Reference date form.refresh =Refresh form.remove =Delete form.reopen =Reopen form.required =Fields with this symbol beside are required fields form.result =Resulting form.resultlist =Record(s) found form.return =Return form.save =Save form.saveas =Save as form.search =Search form.select =Select form.selectall =Select all form.selectedmeds =Selected medicines form.selmeds =Select medicines form.shortname =Short name form.ula =eTB Manager User License Agreement form.update =Update form.years =year(s) global =months global.accessdenied =Access denied global.age =years global.atdiag =at diagnosis global.clicktoseelist =Click here to see the list. global.colgrouping =Column grouping global.colvariable =Column variable global.comments =Comments global.createdby =Created by global.current =current global.date =Date global.dateformat =(dd/mm/yyyy) global.day =day global.days =days global.description =Description global.duration =Duration global.endmonthyear =Final month/year global.export =Export global.filters =Data selection filters global.finalinitialdateerror =The final date can't be after the initial date. global.hour =hour global.hours =hours global.inimonthyear =Initial month/year global.kg =Kg global.legacyId =Standard ID global.level =Level global.localtime =Local time global.location =Location global.mandatory =mandatory global.min =min global.month =Month global.months =Months global.monthth ={0} month of treatment global.monthth.2 =# month of treatment global.negative =Negative global.no =No global.notdef =Undefined global.notdone =Not done global.nounitfound =No units found for the selected administrative unit. global.perc =Percentage global.period =Period global.planned =Planned global.positive =Positive global.print =Print this page global.registerFound =Rows selected global.rowgrouping =Rows grouping global.rowvariable =Row variable global.searchkey =Search key global.sec =sec global.sorting =Sorting global.statistics =Statistics global.symptom =Symptom global.table.columns =Columns global.table.rows =Rows global.timeago ={0} ago global.total =Total global.totalPrice =Total price global.unitPrice =Unit price global.wait =Wait... global.waitmsg =Request is being processed global.week =Week global.year =Year global.years =years global.yes =Yes home =Home javax.faces.component.Reason.REQUIRED= javax.faces.component.UIInput.CONVERSION=value could not be converted to the expected type javax.faces.component.UIInput.REQUIRED=Value is required javax.faces.component.UIInput.UPDATE=an error occurred when processing your submitted information javax.faces.component.UISelectMany.INVALID=value is not valid javax.faces.component.UISelectOne.INVALID=value is not valid javax.faces.converter.BigDecimalConverter.DECIMAL=value must be a number javax.faces.converter.BigDecimalConverter.DECIMAL_detail=value must be a signed decimal number consisting of zero or more digits, optionally followed by a decimal point and fraction, eg. {1} javax.faces.converter.BigIntegerConverter.BIGINTEGER=value must be an integer javax.faces.converter.BigIntegerConverter.BIGINTEGER_detail=value must be a signed integer number consisting of zero or more digits javax.faces.converter.BooleanConverter.BOOLEAN=value must be true or false javax.faces.converter.BooleanConverter.BOOLEAN_detail=value must be true or false (any value other than true will evaluate to false) javax.faces.converter.ByteConverter.BYTE=value must be a number between 0 and 255 javax.faces.converter.ByteConverter.BYTE_detail=value must be a number between 0 and 255 javax.faces.converter.CharacterConverter.CHARACTER=value must be a character javax.faces.converter.CharacterConverter.CHARACTER_detail=value must be a valid ASCII character javax.faces.converter.DateTimeConverter.DATE=value must be a date javax.faces.converter.DateTimeConverter.DATETIME=value must be a date and time javax.faces.converter.DateTimeConverter.DATETIME_detail=value must be a date and time, eg. {1} javax.faces.converter.DateTimeConverter.DATE_detail=value must be a date, eg. {1} javax.faces.converter.DateTimeConverter.PATTERN_TYPE=a pattern or type attribute must be specified to convert the value javax.faces.converter.DateTimeConverter.TIME=value must be a time javax.faces.converter.DateTimeConverter.TIME_detail=value must be a time, eg. {1} javax.faces.converter.DoubleConverter.DOUBLE=value must be a number javax.faces.converter.DoubleConverter.DOUBLE_detail=value must be a number between 4.9E-324 and 1.7976931348623157E308 javax.faces.converter.EnumConverter.ENUM=value must be convertible to an enum javax.faces.converter.EnumConverter.ENUM_NO_CLASS=value must be convertible to an enum or from the enum, but no enum class provided javax.faces.converter.EnumConverter.ENUM_NO_CLASS_detail=value must be convertible to an enum or from the enum, but no enum class provided javax.faces.converter.EnumConverter.ENUM_detail=value must be convertible to an enum or from the enum that contains the constant {1} javax.faces.converter.FloatConverter.FLOAT=value must be a number javax.faces.converter.FloatConverter.FLOAT_detail=value must be a number between 1.4E-45 and 3.4028235E38 javax.faces.converter.IntegerConverter.INTEGER=value must be an integer javax.faces.converter.IntegerConverter.INTEGER_detail=value must be an integer number between -2147483648 and 2147483647 javax.faces.converter.LongConverter.LONG=value must be an integer javax.faces.converter.LongConverter.LONG_detail=must be an integer number between -9223372036854775808 and 9223372036854775807 javax.faces.converter.NumberConverter.CURRENCY=value must be a currency amount javax.faces.converter.NumberConverter.CURRENCY_detail=value must be a currency amount, eg. {1} javax.faces.converter.NumberConverter.NUMBER=value must be a number javax.faces.converter.NumberConverter.NUMBER_detail=value must be a number javax.faces.converter.NumberConverter.PATTERN=value must be a number javax.faces.converter.NumberConverter.PATTERN_detail=value must be a number javax.faces.converter.NumberConverter.PERCENT=value must be a percentage amount javax.faces.converter.NumberConverter.PERCENT_detail=value must be a percentage amount, eg. {1} javax.faces.converter.STRING =value could not be converted to a string javax.faces.converter.ShortConverter.SHORT=value must be an integer javax.faces.converter.ShortConverter.SHORT_detail=value must be an integer number between -32768 and 32767 javax.faces.validator.DoubleRangeValidator.MAXIMUM=value must be less than or equal to {0} javax.faces.validator.DoubleRangeValidator.MINIMUM=value must be greater than or equal to {0} javax.faces.validator.DoubleRangeValidator.NOT_IN_RANGE=value must be between {0} and {1} javax.faces.validator.DoubleRangeValidator.TYPE=value is not of the correct type javax.faces.validator.LengthValidator.MAXIMUM=value is must be shorter than or equal to {0} characters javax.faces.validator.LengthValidator.MINIMUM=value is must be longer than or equal to {0} characters javax.faces.validator.LongRangeValidator.MAXIMUM=value must be less than or equal to {0} javax.faces.validator.LongRangeValidator.MINIMUM=value must be greater than or equal to {0} javax.faces.validator.LongRangeValidator.NOT_IN_RANGE=value must be between {0} and {1} javax.faces.validator.LongRangeValidator.TYPE=value is not of the correct type javax.faces.validator.NOT_IN_RANGE=value must be between {0} and {1} labs =Laboratory labs.classification =Type of suspect labs.newreq =New exams request labs.newreq.addsample =Add sample labs.newreq.exams =Exams to perform labs.newreq.noexam =At least one exam must be selected labs.newreq.samples =Patient samples labs.nolab =You must be in a laboratory labs.nolabmsg =Sorry, but there is no laboratory assigned to your account. In order to go on, contact your system administrator labs.reqdate =Requested on labs.sampledata =Patient sample exams labs.sampletitle =Patient sample collected on {0} labs.searchhint =Enter the name, part of the name or sample id number of the patient labs.searchresult =Sample search result labs.title =Laboratory management labs.user.labinfo =Required only if user is from a laboratory and post test results left =\u2039 locale.dateMask =99/99/9999 locale.datePattern =dd/MM/yyyy locale.dateTimeMask = locale.dateTimePattern = locale.displayDatePattern =dd/MM/yyyy locale.displayDateTimePattern = locale.outputDatePattern =dd/MM/yyyy login.browser_incompat =Incompatible Browser login.browser_incompat.content=The browser version that you are using is no more supported by e-TB Manager. To continue using e-TB Manager, you must use one of the browsers bellow: login.browser_incompat.download=Go to download page login.click_here =Click here login.connection_date =Connection date login.copyright =Copyright \u00a9 2005 Management Sciences for Health, Inc. All rights reserved. login.enter =Enter login.enter_system =Welcome to e-TB Manager login.enteremail =Please, enter the e-mail address assigned to your user account. A new password will be sent to this email. login.msg1 =Enter your User Name and Password to login login.msg2 =Forgot your password? login.newuser =Don't have an User Name? login.noemail =This e-mail address does not exist in the system login.norole =No permission was assigned to the user login.organization =Organization login.pwdsent =A new password was sent to the e-mail #0 login.regpage =Registration page login.regpage.msg1 =Please, fill in all the fields below to get access to e-TB Manager. A password will be sent to your email. login.regpage.msg2 =Congratulations! login.regpage.msg3 =Your user name was successfully registered in the system. login.regpage.msg4 =The system generated a password and sent it to your e-mail address. login.rememberme =Remember me login.user_login =User Name mail.detaillink =For detailed information, click on the link bellow mail.fail =Error sending e-mail message to #0 mail.forgotpassword =New password requested mail.forgotpassword.msg =You have requested a new password to enter in e-TB Manager. Your password was reset to mail.hi =Hi {0} mail.introduction =This is an automatic message sent by the e-TB Manager and it shall not be answered. mail.loginmsg =To login just click on mail.newpassword =New password mail.newpassword.msg =A new password was created to log into the e-TB Manager mail.newuser =New user account mail.newuser.msg =A new user account and password were created to log into the e-TB Manager mail.regards =Regards mail.signature =e-TB Manager System Administrator mail.success =An e-mail message was sent to #0 main.seltheme =Select theme manag =Management manag.case.reports =Case Management Indicators & Reports manag.confmdrrep =Annual report of treatment result of confirmed MDR-TB patients starting Category IV treatment - WHO Form 07 manag.confmdrrep.new =New manag.confmdrrep.prev12line =Previously treated with first-line drugs only manag.confmdrrep.prev1line =Previously treated with both first- and second-line drugs manag.delay.diag =Delay in MDR-TB diagnosis manag.delay.max =Maximum manag.delay.mean =Mean manag.delay.min =Minimum manag.delay.num =No. of MDR-TB cases with info on interval manag.delay.start =Delay in MDR-TB Start Treatment manag.delaystarttreat =Delay in MDR-TB diagnosis and Start Treatment manag.delaystarttreat.title1 =Delay in MDR-TB diagnosis and Start Treatment manag.desc =Allows to generate, search and print reports, indicators, medicine forecasting and data exportation manag.drug.reports =Medicine Management Reports manag.dstprofile.mdrresistance=Multi-Drug Resistance(MDR) Results manag.dstprofile.monoresistance=Mono-resistance Results manag.dstprofile.polyresistance=Poly-resistance Results (other than MDR) manag.dstprofile.title.dstresults=DST Results manag.dstprofile.title.prevtreatcases= manag.export =Export TB/DR-TB case data manag.export.format =File format and content manag.forecast =Tools manag.forecast.batchdet =Bacthes details manag.forecast.batches =Batches details manag.forecast.batchtoexpire =Quantity with expiring shelf life manag.forecast.bufferStock =Buffer stock manag.forecast.cases =Cases on treatment manag.forecast.casesfc =Continuation phase (total months estimated) manag.forecast.casesfi =Intensive phase (total monthly estimated) manag.forecast.casesini =Update manag.forecast.casessource =How to get the cases on treatment? manag.forecast.casessource.opt1=Cases already registered in the system manag.forecast.casessource.opt2=Provide total number of cases that started treatment per month manag.forecast.clearconfirm =All batches and orders will be deleted. Confirm? manag.forecast.context =Context manag.forecast.dispensingLeadTime=Dispensing quantity manag.forecast.estcases =Estimated consumption (previous cases) manag.forecast.estnewcases =Estimated consumption (new cases) manag.forecast.estqty =Estimated quantity to be procured manag.forecast.execute =Execute manag.forecast.execute.desc =Execute the forecasting (re)calculating the results manag.forecast.expiredquantity=Quantity lost due to expiration manag.forecast.includecases =Include cases already registered in the database manag.forecast.initialcohort =Initial cohort (months ago) manag.forecast.input =Variables manag.forecast.lastprev =Saved forecasting manag.forecast.lateorder =The order for this medicine is delayed manag.forecast.leadtime =Lead time manag.forecast.length =Forecasting duration manag.forecast.load =Load forecasting manag.forecast.med =Medicine forecasting manag.forecast.new =New forecasting manag.forecast.newcases =New cases manag.forecast.newcasestitle =Estimated number of new cases per month manag.forecast.newcasestitle2 =Percentage of new cases per treatment regimen manag.forecast.neworder =New order manag.forecast.nonextproc =After {0} manag.forecast.notfound =No forecasting saved manag.forecast.numcases =Number of cases on treatment manag.forecast.numcasesreg =Number of cases manag.forecast.numnewcases =Number of new cases manag.forecast.ongoingcohorts =Estimated Qty (On-going cohorts) manag.forecast.orderDate =Next procurement date manag.forecast.ordererr =The expiration date must be after the receiving date manag.forecast.percreg =% of new cases manag.forecast.qtdmissing =Quantity missing manag.forecast.refdate =Reference date manag.forecast.refdateerr =The date must be after the reference date manag.forecast.refdatemsg1 =The reference date must be before the start date manag.forecast.rem =Delete forecasting manag.forecast.results =Results manag.forecast.reviewperiod =Review period manag.forecast.setprevcohorts =Specify fixed number of cases already on treatment manag.forecast.stockafterleadtime=Stock on hand after lead time manag.forecast.stockonhand =Stock on hand manag.forecast.stockonhand2 =Stock on hand on the reference date manag.forecast.stockonorder =Stock on order manag.forecast.tabres1 =Summary manag.forecast.tabres2 =Medicine consumption manag.forecast.tabres2.cell1 =Consumption of previous cases manag.forecast.tabres2.cell2 =Consumption of new cases manag.forecast.tabres2.cell3 =Quantity lost due to expiration manag.forecast.tabres3 =Cases on treatment manag.forecast.tabres3.cell1 =Previous cases on treatment manag.forecast.tabres3.cell2 =New cases on treatment manag.forecast.updatedm =Load from medicine module manag.hivreport =HIV Status manag.hivreport.hivtestperformed=HIV Test Performed? manag.hivreport.title1 =Distribution of cases by HIV test performed manag.hivreport.title2 =Distribution of cases by HIV test result manag.hivreport.title3 = manag.ind =Indicators manag.ind.cativ =Number of patients started on category IV treatment manag.ind.cover =Treatment coverage and delay manag.ind.customind =TB/DR-TB Consolidated report manag.ind.demog =Demographic profile manag.ind.demog.age =Case distribution by age range manag.ind.demog.gender =Case distribution by gender manag.ind.demog.nat =Case distribution by gender manag.ind.detrate =Case detection rate manag.ind.dstprofile =Drug Resistance Survey - First Line Drugs manag.ind.dstprofile.anyresistto=Any Resistance to manag.ind.dstprofile.failureDefaultOthers= manag.ind.dstprofile.nevertreated=Never Treated manag.ind.dstprofile.nevertreatedpercent=Never Treated (%) manag.ind.dstprofile.onlyresistto=Resistance to only manag.ind.dstprofile.prevtreated=Previously Treated manag.ind.dstprofile.prevtreatedFail1= manag.ind.dstprofile.prevtreatedReTreat= manag.ind.dstprofile.prevtreatedRelpase= manag.ind.dstprofile.prevtreatedpercent=Previously Treated (%) manag.ind.dstprofilesecondline=Drug Resistance Survey manag.ind.hiv =Incidence of HIV manag.ind.incidence =Case Notifications (new) manag.ind.infectsite =Number of cases by site of disease manag.ind.interim =Interim outcome assessment of confirmed MDR-TB cases - WHO Form 06 manag.ind.interim.negative =Negative (smear and culture) manag.ind.interim.nolonger =No longer on treatment manag.ind.interim.positive =Positive (smear or culture) manag.ind.interim.starttreat =Cases that started treatment manag.ind.interim.title1 =Bacteriological result at {0} months of treatment manag.ind.interim.title2 =No longer on treatment manag.ind.interim.unknown =Unknown manag.ind.mdr =DR-TB Indicators manag.ind.numc =Number of cases manag.ind.otherfilters =Other filters manag.ind.outcome =Outcomes manag.ind.outcome6 =Interim treatment outcome at 6-months manag.ind.perctb =Percentage of DR-TB cases among all new TB cases manag.ind.periodfilter =Period for case selection manag.ind.prevalence =Case Notifications (all) manag.ind.prevtreat =Number of cases by previous TB treatment manag.ind.reggroup =Number of cases by patient type manag.ind.resist =Drug Resistance Profile manag.ind.resist.edt =Edit resistance profiles manag.ind.resist.medsel =Select the medicines to compose the resistance profile manag.ind.resist.other =Other combinations manag.ind.starttreat =Quarterly report on MDR-TB detection and Category IV treatment start - WHO Form 05 manag.ind.starttreat.conf =Confirmed cases manag.ind.starttreat.prev1l =Previously treated with first-line drugs manag.ind.starttreat.prev2l =Previously treated with second-line drugs manag.ind.starttreat.susp =Suspected cases manag.ind.starttreat.title1 =Number of patients detected during the period manag.ind.starttreat.title2 =Number of patients who started treatment during the period manag.ind.successrate =Success rate manag.ind.suspectprevalence =Suspect Notifications manag.ind.tb =TB Indicators manag.ind.treatoutcome =Outcomes manag.ind.treatres =Treatment result of confirmed TB/DR-TB patients manag.inds =Indicators manag.noperiodsel =Please select at least one field to search for cases by period manag.percValues =Show as percentage manag.rel1 =Stock position by province manag.rel2 =Estimated stock position manag.rel3 =Stock Transaction manag.rel4 =Average lead time of medicine orders manag.rel5 =Treatment cost by patient manag.rel5.medcost =Cost of the treatment by medicine manag.rel6 =General report of medicine movimentation manag.reportgen =Data Analysis Tool manag.reportgen.addfilters =Add filters manag.reportgen.addind =Add indicator manag.reportgen.beforetreat =Before treatment manag.reportgen.collect =Data of sample collection manag.reportgen.culture =Culture manag.reportgen.delete =Delete report manag.reportgen.dst =DST manag.reportgen.error1 =The variable {0} is being used more than once in columns and lines manag.reportgen.error2 =Report cannot be generated with the combination of more than one date variable manag.reportgen.error3 =The selected variables cannot be used together: {0} and {1} manag.reportgen.indfilters =Indicator filters manag.reportgen.microscopy =Microscopy manag.reportgen.newreport =New report manag.reportgen.novars =At least one variable must be specified for columns and lines of the table manag.reportgen.over =Over {0} manag.reportgen.repfilters =Report filters manag.reportgen.save =Save report manag.reportgen.saveas =Save report as manag.reportgen.suspconf =Confirmed (registered as suspect) manag.reportgen.totalcases =Number of cases manag.reportgen.totalcasesby =Number of cases by manag.reportgen.unit.numerexams=Number of exams manag.reportgen.var.cultdiag =Culture of diagnostic manag.reportgen.var.cultresgroup=Culture result group manag.reportgen.var.culturemonth=Cultures by month manag.reportgen.var.cultureneg=Negativation month of culture manag.reportgen.var.cultureyear=Cultures by year manag.reportgen.var.dstmonth =DST exams by month manag.reportgen.var.dstyear =DST exams by year manag.reportgen.var.groupothers=Others manag.reportgen.var.micdiag =Microscopy of diagnostic manag.reportgen.var.micmonth =Microscopies by month manag.reportgen.var.micneg =Negativation month of microscopy manag.reportgen.var.micresgroup=Microscopy result group manag.reportgen.var.micyear =Microscopies by year manag.reportgen.var.monthtreat=Treatment duration (months) manag.reportgen.var.prevnum =Number of previous treatments manag.reportgen.var.prevoutcome=Previous case outcome manag.reportgen.var.tbcasetype=Previous use of medicine manag.reportgen.var.totalexams=Number of laboratorial exams manag.reportgen.var.xpertdiag =Xpert test of diagnosis manag.reportgen.xpert =Xpert MTB/RIF manag.reports =Reports manag.sideeffects.title1 =Distribution of cases by incidence of adverse reactions manag.sideeffects.title2 =Distribution of cases among adverse reactions types managg.reportgen =Report generator mdrtb_system =e-TB Manager mdrtbsys =TB Management Information System mdrtbsys.request_error =Connection failure. Please try again later. If the error persists contact your system administrator. med.statusoncomment =Status when commenting medicine.almostStockedOut =This medicine is almost stocked out. medicine.usable =Usable medicines =Medicines medicines.transfer.commentreq =When the received quantity is different than the shipped quantity the comment is required. medicines.transfer.datebefore = medicines.transfer.validationmsg1=The destination unit cannot be the same as the sending unit. meds.amc =AMC meds.amc.desc =Average Monthly Consumption meds.desc =Allows to record, search, follow and authorize medicines receiving, orders, transfers, dispensing, movements and stock position. meds.dispensing =Medicine dispensing meds.dispensing.date =Dispensing date meds.dispensing.details =Dispensing details meds.dispensing.edit =Enter dispensing meds.dispensing.error1 =No medicine was entered for dispensing meds.dispensing.estimate =Estimate quantity based on dispensing to patient meds.dispensing.invalidqtd =The dispensing quantity is bigger than the reserved quantity in stock for the following medicines meds.dispensing.lastdisprec =Last dispensing registered meds.dispensing.new =New Medicine Dispensing meds.dispensing.nodisp =No dispensing information found for the month/year selected meds.dispensing.patients =Dispensing to patient meds.dispensing.register =Register dispensing meds.dispensing.totdisp =Total dispensed qty meds.dispensing.view =Dispensing history meds.dispensing.weekmsg =Week {0}: From day {1} to {2} meds.inventory =Inventory meds.inventory.expiredmsg =This medicine has batches expired. meds.inventory.expiringmsg =This medicine has batches to expire in {0} month(s). meds.inventory.maxmonthsmsg =This medicine reached the maximum of {0} month(s) of stock. meds.inventory.minmonthsmsg =This medicine reached the minimum of {0} month(s) of stock. meds.inventory.monthsstock =# months stock on hand meds.modify =Modify meds.mov.newadjust.newbatch =Include new batch on stock adjustment meds.movs =Medicine movements meds.movs.adjchange =Change quantity meds.movs.adjreason =Reason for adjustment meds.movs.adjustok =The stock adjustment was successfully done meds.movs.availableqtty =Available quantity meds.movs.datebefore =Date cannot be before the unit start date of medicine management on {0} meds.movs.delbatch =Delete batch meds.movs.destunit =Destination Unit meds.movs.editoutofperiod =Can edit medicine movements (create or remove) out of period. meds.movs.errorlimitdate =Date must be after {0}. meds.movs.expiredposdjust =You cannot increase the quantity if reason for adjustment is medicine expiring meds.movs.from =From meds.movs.invalidqtd =The entered quantity cannot be bigger than the available quantity in stock meds.movs.itensmov =Transferred medicines meds.movs.movqtd =Movement quantity meds.movs.newadjust =Adjust stock quantity meds.movs.newqtty =New quantity meds.movs.outdate =Date of disposal meds.movs.productinlist =The medicine has already been entered meds.movs.productreq =The product is required meds.movs.refdate =Reference date meds.movs.regqtty =Registered quantity meds.movs.selectfilter =To show movements, at least the date or the pharmacy store must be entered meds.movs.showbatches =Display batches meds.movs.stockqtty =Stock quantity at previous month end meds.movs.to =To meds.nextorderdate =Next order date meds.nounit =No unit found meds.onemonthless =Less than one month meds.orders =Medicine orders meds.orders.authorized =The order was authorized meds.orders.authorizerdesc =Before shipping, this order must be authorized by the following unit meds.orders.autorize =Authorize order meds.orders.available =Available in stock meds.orders.batches =Batches meds.orders.cancel =Cancel order meds.orders.cancelsuccess =The order was successfully cancelled meds.orders.cannotcancel =Received orders cannot be cancelled meds.orders.createdin =Order created in meds.orders.diffQuantityReceived=Orders with quantity received less than the amount sent. meds.orders.initerror =Unable to estimate quantity. Check the number of days for medicine consumption estimation in the administration module. meds.orders.invalidqtd =Invalid quantity of medicines meds.orders.invalidreceivingdate=The receiving date cannot be before the shipment date meds.orders.invalidshipmentdate=The shipment date cannot be before the authorizing date meds.orders.mail.authorized.msg1=A medicine order has just been approved and is being prepared for shipment. meds.orders.mail.new.msg1 =A new medicine order has just been posted by the unit bellow meds.orders.mail.shipped.msg1 =The medicine order was shipped to the unit bellow. Once the medicines are delivered, register it in eTB Manager. meds.orders.mail.toship =New medicine order waiting for shipment meds.orders.mail.toship.msg1 =The medicine order bellow is waiting for its shipment to the unit that requested it. Once the order is shipped, record the transaction in eTB Manager. meds.orders.new =New medicine order meds.orders.new.confirm =Confirm Order meds.orders.new.medicines =Medicine selection meds.orders.new.post =Place order meds.orders.nobatchsel =No batch selected meds.orders.nomedicine =No medicine to order meds.orders.noobs =A comment is required if the receiving quantity is different from the shipped quantity meds.orders.noopenorder =There is no open order. meds.orders.openorders =Orders Pending meds.orders.openorders.my =Orders from this unit meds.orders.openorders.recs =orders to be shipped meds.orders.openorders.toaut =Orders to authorize meds.orders.previous =Previous order meds.orders.print =Print order meds.orders.printpac =Print patient list meds.orders.qtdordered =Ordered quantity meds.orders.receive =Notify receiving meds.orders.received =Order was successfully registered as received meds.orders.remove =Delete order meds.orders.shipaddr =Shipping address meds.orders.shipment =Notify shipment meds.orders.shipment.rollback =Reverse order shipment meds.orders.shipment.rollback.confirm=Confirm reverting the medicine order to the waiting for shipment status? meds.orders.shipped =Medicine order was registered as shipped meds.orders.unavailable =Unavailable meds.orders.viewall =Order history meds.orders.viewopen =View Pending Orders meds.patients =Patients enrolled meds.patients.medicinereq =At least one medicine shall be entered meds.patients.new =New DR-TB Case meds.patients.presenttreatment=Current treatment meds.patients.valuesreq =#0: All values must be informed meds.receiving =Receivings from manufacturer meds.receiving.addbatchmed =Add batch to this medicine meds.receiving.edt =Edit medicine receiving meds.receiving.new =New medicine receiving meds.receiving.newbatch =New batch meds.receiving.nobatch =No batch was included meds.receiving.removeerror =The receiving cannot be removed because some batches are already in use meds.receiving.viewall =View all receivings meds.reports =Reports meds.selbatches =Select batches meds.selbatches.expired =Expired batch meds.selunit =Select another unit meds.start =Start medicine management meds.start.alert =Medicine management has not been started\u200f meds.start.medtitle =Provide the amount of each medicine batch on the start date meds.start.notstarted =This unit didn't start the medicine management. meds.start.remove =Remove unit from medicine management meds.start.removeconfirm =Confirm removing the TB unit from the medicine management? All information related to medicine management will be erased. meds.stockoutdate =Estimated months of stock meds.stockpos =Stock position meds.stockpos.adjust =Make a stock adjustment meds.stockpos.info =Medicine stock information meds.stockpos.minbs =Quantity under minimum buffer stock meds.stockpos.minstock =Quantity is under minimum buffer stock meds.stockpos.msg1 =The stock quantity is not correct? meds.transfer =Medicine transfer meds.transfer.all =All transfers meds.transfer.batchqtty =Value cannot be bigger than the available quantity meds.transfer.cancel =Cancel transfer meds.transfer.commentreq =A comment is required if the received quantity is different from the shipped quantity meds.transfer.datebefore =The receiving date cannot be before the shipping date meds.transfer.detail =Transfer details meds.transfer.error =The quantity to transfer is bigger than the available quantity meds.transfer.mail01 =A new medicine transference has been registered from the unit meds.transfer.mail02 =The transference hasn't been confirmed. To confirm, you must log in the system and register the receiving at the moment it arrives in destiny unit. meds.transfer.mail03 =To register the medicine receiving in the destiny unit, click on the link below. meds.transfer.mail04 =New Medicine Transference meds.transfer.new =New Medicine Transfer meds.transfer.nofound =No transfer found meds.transfer.ok =The medicine transfer was successfully registered meds.transfer.print =Print meds.transfer.qtty =Quantity to transfer meds.transfer.receive =Notify transfer receiving meds.transfer.received =Received transfers meds.transfer.sent =Sent transfers meds.transfer.viewhistory =Transfer history meds.transfer.viewopen =View Transfers Pending meds.undefined =Undefined meds.unitsetup =Unit setup meds.unitsetup.meds =Unit medicines settings meds.unitsetup.msgok =Unit stock setup was successfully changed meds.unitsetup.order =Medicine order settings meds.unitsetup.overwrite =Use default meds.unitsfound ={0} unit(s) found menu_options =Options org.jboss.seam.IllegalNavigation=Illegal navigation org.jboss.seam.NoConversation =The conversation ended, timed out or was processing another request org.jboss.seam.NotLoggedIn =User not logged in. Please log in first org.jboss.seam.ProcessEnded =Process #0 already ended org.jboss.seam.ProcessNotFound=Process #0 not found org.jboss.seam.TaskEnded =Task #0 already ended org.jboss.seam.TaskNotFound =Task #0 not found org.jboss.seam.TransactionFailed=Transaction failed org.jboss.seam.loginFailed =Login failed org.jboss.seam.loginSuccessful=Welcome, #0 patients.allcases =Include completed cases patients.beforedate =The transferring date must be after #0 patients.desthu =Destination Health Unit patients.enddatebefore =The finish treatment date cannot be before the start treatment date in #0 patients.medicinealreadypresc =#0 was already registered with previous entered dates patients.medicinebefore =The prescription date cannot be before the start treatment date in the current health unit patients.presenttreatment =Current treatment patients.transfinfo =Transferring information quarter.closequarter.msg2 =You can only close that quarter after {0}. quarter.expiringbatchlist.noresultmsg=There is no batch with expiry date within six months, based on the closing date of the quarter selected quarter.expiringbatchlist.titlecomplement=(after the closing date of the quarter) quarter.listnotiniunits =List of units that hadn't started the medicine module yet quarter.listopenquarterunit =List of units that hadn't closed the selected quarter yet quarter.notinitializedunit =Medicine management has not been started in {0} unit(s). quarter.notinitializedunit2 =Medicine management has not been started by the selected unit. quarter.opened =Latest quarter open quarter.openquarterunit =There is(are) {0} unit(s) that have not yet closed the quarter selected. quarter.openquarterunit2 =This quarter has not yet been closed by the selected unit. quarter.savingalert =Saving this form all data regarding adjustments, consumption, expired and days out of stock previously registered in this quarter for this medicine will be excluded. quarter.savingalert2 =Saving this form all data regarding adjustments, expired and days out of stock previously registered in this quarter for this medicine will be excluded. quarter.transferout =Transfer out regimen.type =Type of regimen regimens.individualized =Individualized regimen regimens.standard =Standardized regimen reports.at =At reports.authorizing =Authorizing reports.averageDays =Days (average) reports.estimatedcons =Estimated consumption reports.estimatedqtdnow =Estimated quantity in stock today reports.finalqtd =Final quantity reports.iniqtd =Initial quantity reports.inqtd =Incoming reports.interimMonths =Months for Interim Outcome reports.numDays =Number of days for estimating reports.numpatients =Number of Cases reports.orderCount =Number of orders reports.orderEvent =Order event reports.outqtd =Outgoing reports.receiving =Receiving reports.released =Issued in reports.shipping =Shipping right =\u203a sideeffect.enddate =Final date of AR sideeffect.inidate =Initial date of AR suspect.details =Suspect details tables =Tables tbcase.firstMedExam =First Medical Examination tbcase.treat.dates.msg01 =The end of treatment can't be before the date that the case entered in the health unit. up =\u2191 userrole =User Role userrole.ANSWER_ISSUE =Answer an issue userrole.CASE_CHANGENUMBER =Change case number (automatically generated by the system) userrole.CASE_COMMENTS =Add comments to a case userrole.CASE_DEL_VAL =Edit/Delete case after validation userrole.CASE_INTAKEMED =Medicine intake follow-up userrole.CASE_PERSONAL_VIEW = userrole.CASE_TAG =Assign tags to a case userrole.CASE_VIEW =General view userrole.CLOSEDEL_ISSUE =Close/delete issues of another user userrole.ERRORLOGREP =Error log report userrole.EXAM_BIOMOL =Molecular Biology userrole.LAB_EDTREQ =Edit laboratory exams request userrole.LAB_POSTRESULT =Post results of exam tests userrole.LAB_REMREQ =Remove laboratory exams request userrole.LOGREP =Transaction log Report userrole.MED_REPORTS =Report control by unit userrole.NEWCASE =Case notification userrole.NEWSUSP =Suspect registration userrole.REM_COMMENTS =Remove comments of other users userrole.SETUPWS =Setup Workspace userrole.TASK =Task execution userrole.TRANSF_PRT =Print medicine transfer data userrole.UNITSETUP =Check unit stock settings userrole.VIEW_MEDICINE_PRICES =View medicine prices userrole.WSADDREMUSER =Add/remove users from workspace usersettings =Settings usersettings.messageskeys =Display messages keys instead of text (translation mode) usersettings.preferences =Preferences usersettings.preferenceschanged=User preferences were successfully changed usersettings.workspace =Workspace in use usersettings.workspacechanged =Workspace successfully changed validator.assertFalse =Validation failed validator.assertTrue =Validation failed validator.creditCard =Invalid credit card number validator.digits =Numeric value out of bounds (<{integerDigits} digits>.<{fractionalDigits} digits> expected) validator.ean =Invalid EAN validator.email =Must be a well-formed email address validator.future =Must be a future date validator.length =Duration must be between {min} and {max} validator.max =Must be less than or equal to {value} validator.min =Must be bigger than or equal to {value} validator.notEmpty =May not be null or empty validator.notNull =May not be null validator.notfuture =Date cannot be a future date validator.past =Must be a past date validator.pattern =Must match "{regex}" validator.range =Must be between {min} and {max} validator.size =Size must be between {min} and {max} SystemConfig.otherLinks.hint=Displayed on the page's footer. Each line is a link in the format label \= url SystemConfig.otherLinks=Other links SystemConfig.jbossPath=JBOSS AS path SystemConfig.jbossPath.hint=If not informed, system will check the JBOSS_HOME environment variable SystemConfig.updateSite=Update site URL admin.checkupdate=Check for update admin.checkupdate.msg3=There is a new version available admin.checkupdate.msg2=Your system is up to date admin.checkupdate.msg1=Checking for update admin.checkupdate.msg4=Error when retrieving information global.disabled=Disabled admin.syssetup.links=Links available at page footer admin.syssetup.sysupdate=System update admin.syssetup.pubdashboard=Dashboard (public view) SystemConfig.pubDashboardWorkspace=Workspace to retrieve dashboard data from manag.reportgen.var.interim=Interim outcome assessment manag.reportgen.overmonths=Over {0} months manag.ind.interim.noassess=Not under assessment MedicineDispensing.msg02=It's not possible to dispense an expired medicine. ExamMicroscopy.numberSamplesCollected=Number of samples collected TbField.REASON_XPERT_EXAM=Reason for geneXpert test labs.editpatient=Edit patient request manag.dat.rifresdetect.dst=DST detection (MDR-TB) manag.dat.rifresdetect.xpert=Xpert detection (RR-TB) manag.reportgen.var.rifresdetection=Rifampicin resistance detection global.noresult=No result found manag.dat.var.treatdelay=Delay between diagnosis and treatment global.maximum=Maximum global.minimum=Minimum global.mean=Mean